Forum Replies Created
-
Posts
-
from what i can see obsolete from all sources
there are a few used ones on ebay
Zanussi ZWD1472S washer dryer dryer belt | eBay
Dave
no access to service manuals on these and to make things worse no parts listing on hotpoint spares site
not sure if its got a reed in the water inlet flow
if its a later machine it may use virtual sensors and i may have some info on that
Dave
dont really see why your earth impedance should stop him repairing your machine. if he was doing house electrical work or worked for the electric supplier I could see a reason. If the earth lead to the machine or back to the board was faulty I could see that but you have an RCD and its operating when you press the test button
yes the customer need to be informed and need to be given a stern warning that this needs to be checked by a part P qualified electrician but if it was me that would be itDave
inisfad wrote:Here, I think this is the washer for the washing machine side: https://www.screwfix.ie/p/arctic-products-washing-machine-hose-washers-3-4-5-pack/6039j
possibly
most hoses we use now have same washer both ends
Dave
https://shop.ukwhitegoods.co.uk/p027155-rangemaster-ceramic-hob-heating-element
someone would need to remove the top and inspect the ring
the energy reg should be this one
https://shop.ukwhitegoods.co.uk/a035988-rangemaster-energy-regulator-switch
Dave
sounds more like a ring fault. like the centre element has failed but vwould need to be checked
would need the serial number to look at parts
only by stripping it and using a multi meter to measure element resistances to see if its faulty
sometimes you can look at the switch and see burnt contacts
Dave
the washer you have is the only one available
those washers will fit all standard fill hoses and the washers are the same both ends
like
https://shop.ukwhitegoods.co.uk/fwh18-1-5m-hot-fill-inlet-hoseDave
