[electrofix]

bell sensor is not a problem at this point, once you pull off the tube the machine should at least spin

if the motor is ok then its only a harness or board fault

check harness for broken wires

Dave

[electrofix]

you can take a look at the burners. make sure all the flame slots / holes are clear. thats all you can do safely as a non professional

Dave

[electrofix]

if you take off the buners there are 2 things sticking up from the hob. one probe is the ignighter the other is a flame sensor to stop gas flowing if the flame gets blown out

its likely this sensing system has failed and needs to be replaced. once we get a model we could give you an idea of poss part price provided that part is faulty but as said above since your replacing a gas component it must be fitted by a suitably qualified engineer

Dave

[electrofix]

last time it happened we landed back on the friday at 7:30 am and then I drove to Yarnfield

Dave

[electrofix]

Uganda

bit of a charity type mission
we go with cases full of stuff for them

http://www.mollyandpaul.org/molly{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20and{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20paul{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20primary{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20school{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}20kmz.html

we will be on this site.

Dave

[electrofix]

will be offline from tuesday till about 23 Feb

little internet apart from an internet cafe about 5 miles away so your on your own for a few weeks

Dave

[electrofix]

well you win some you lose some but at the cost it was worth a gamble

Dave

[electrofix]

07026171 element
07026232 motor

Dave

[electrofix]

have you tried a different socket as they can fail and cause this too

Dave

[electrofix]

you have it on a garage that means is possible you getting condensation forming in the heater duct

I would remove the element and look for bits of lint that might short the element to earth if it got damp

Dave

[electrofix]

the image has to under 2Mb to save server cost

to use the google account it has to be a public link as the link you use will need a password

Dave

[electrofix]

very likely it will need an element

Dave

[electrofix]

the electric meter is not tripping its the RCD in your fuse board

one of the elements in the oven has an earth fault and you either have to do an insulation test on each element or disconnect both wires from them, make wires safe and try it

when it stops tripping you have found it

Dave

[electrofix]

because of server space pic sizes are limited
so best to upload to a pic site like google pics and then post a public link

Dave

[electrofix]

ok now put 2 screw to hold the cover on and try it

does it still trip ?

Dave

[Author]

Posts