Forum Replies Created
-
Posts
-
difficult to say but top suspect is the remote. if it was the reciever you would expect other functions not to work
problem is you will only know for certain if you swop it
Dave
cant say looking at the pic would need to see it
but from your description it sounds like the door needs to be lifted so it does not catchDave
if i think on nexr week may be able to get part no as have got a 20 year old hotpoint fastrak disc
Dave
you can change the hose clamp but be careful you dont over tighten as its a plastic spigot
what they should have bone is put a bulge on the end of the spigot
Dave
Omar wrote:On the rating plate it says. Made in Germany
ok thats interesting
saw one that was sharp built. the last one I saw had a door lock the same as one of the budget modelsbut if the door is as bad as you can it cant be up to the normal german engineering standard
Dave
motor is always comes second after heater check for carbon dust but try a different socket if you haven’t already
Dave
short answer is I dont know
I also dont know who makes Miele microwaves at the moment but am fairly sure its not Miele
as with a lot of manufacturers they make only a few products and the rest are bought in. Their fridges for instance are Leibherr and they are first class
Dave
a lot of glues these days are water soluble and that wont work in this case. in this case its flammable if near flames. so lots of ventilation
https://www.halfords.com/motoring/pa…ve-652891.html
Dave
