[electrofix]

did you check the oven probe resistance ?

Dave

[electrofix]

sorted
check your email

Dave

[electrofix]

double check the tacho resistance with it unplugged and temp sensor before you jump on the board

Dave

[electrofix]

have you checked for blockages

if you remove the plastic peice in the sump where the water goes to the wash motor and mop water out you can use a mirrior to look at the impellor imput

had one the other day with same symptoms and it was a peice of plastic. hooked it out with a peice of wire and all was well

Dave

[electrofix]

there is a tacho on the back of the motor that feeds back speed to the board

so its either

Tacho
broken wires or
the board

Dave

[electrofix]

must be a cheap oddball import

try ringing them

01909 544 570
Monday – Friday 9:30am – 4:30pm, excluding bank holidays

Dave

[electrofix]

well it does not sound like vestel

does it look like this one ?

https://www.espares.co.uk/product/es1560989/dishwasher-heater-element

Dave

[electrofix]

i have checked and an enginn
eer wouldc have to replace the electrode and cable to fix the problem
part is about £15 so not expensive

Dave

[electrofix]

its not dangerous but it sounds like you may need a new wire at some point as the insulation has broken down

Dave

[electrofix]

brilliant

well done

Dave

[electrofix]

first we need to try and figure out where its made

we know its an import from Argos but dont know where from

2 main contenders are Termikel and Vestel

What type of heater is it ?

any other numbers?

Dave

[electrofix]

if you want the service manual let me have an email

Dave

[electrofix]

look for broken or burnt switch contacts

if that looks of then check each contact closes and opens with a multi meter

Dave

[electrofix]

one of the NTC, s or wiring faulty

check your email

Dave

[electrofix]

well would expect motor to turn next if we are following a sequence

have you tried a spin programme ?

Dave

[Author]

Posts