Forum Replies Created
-
AuthorPosts
-
electrofix
Moderatorthe earth leakage although not desirable will not stop your oven working. yes if you installed a safety trip it may trip out but as long as the oven is solidly earthed its not unsafe to use
something else must have blown when the element failed
Dave
electrofix
Moderatorsorted
Dave
September 14, 2022 at 3:36 pm in reply to: Indesit DIF 04b1 – Not drying or stopping, but no fault code. #483651electrofix
ModeratorI would check the heater as if the heater fails it extends all the progammes that need it
Dave
September 14, 2022 at 3:30 pm in reply to: Washing machine Beko WMB 91242 LC stopped mid cycle #483645electrofix
Moderatorassume the way you are talking the machine power up or is it dead
if it does power have you double checked the child lock as most machines have one these days
Dave
electrofix
Moderatorwhen you say the cause are you
Getting E15 because of a leak but cant find the leak
or
Getting E15 but the is no leak ?Dave
September 13, 2022 at 7:46 pm in reply to: Washing machine Beko WMB 91242 LC stopped mid cycle #483643electrofix
Moderatoryou say it stopped mis cycle but dont say what it was trying to do
have you set the machine to pump and started it while watching the impellor
Dave
electrofix
Moderatorelectrofix
Moderatorok its not the flashing ones that are important itd the ones that are not
the lights that show the programme progress are the fault code
Daveelectrofix
Moderatorbit of a long shot as siemans manuals are rare
https://www.manualslib.com/manual/958098/Bosch-She4am12u.html?page=8#manual
closest i can get
try to see if their ways of extracting fault codes works on your unitDave
September 13, 2022 at 6:53 pm in reply to: John Lewis washer dryer JLWD1614 auto dry finishing too soon #483412electrofix
ModeratorAswo seems to be cheaper at £36.32 plus vat
Dave
September 13, 2022 at 11:59 am in reply to: John Lewis Heat Pump flashing “dryer cycle” sign #483589electrofix
Moderatorhave you check the motor plug and wires have not been moved or damaged when the belt flew off as they go with quite a bang
dave
September 13, 2022 at 11:39 am in reply to: John Lewis Heat Pump flashing “dryer cycle” sign #483587electrofix
Moderatoris the motor free to turn ?
Dave
electrofix
Moderatoras far as i know a flashing light tap symbol is just an indication there is a fault but never worked out how to tell which
do any other lights change and stay lit when it faults out
does it fault out immediately or wait 5 mins or so ?
Dave
electrofix
Moderatorwell with the belt off, as long as the wires to the motor are not damaged, it should run
Dave
electrofix
Moderatoryou will need to let me have the complete Pnc number
the ones i looked up for this model have a simple door sw and no pcb
Dave
-
AuthorPosts
