[garn]

Re: AWCT 12L

morning every one.

im going to have to apply for the repair contract myself
can someone point me in the right direction please.

garn

[garn]

Re: AWCT 12L

thanks for the tip megawatt.
im still on sick leave waiting to go into hospital on the 6 sep cant do nothing myself customer has to wait at the moment.

garn.

[garn]

Re: CONTRACTING CAN IT BE GOOD OR BAD

i know what you mean by doing the job yourself it gets done quicker and the buck stops with you then.

i take that you dont put all your eggs in 1 basget?

garn

[garn]

Re: service force

Thanks don & K
The Matter Is A bit delicate To say at The moment .
Buti have been dying to say about The mess That has Been Caused over The Past year.

garn
…………………………………………………..

beware When your ops manager comes along and asks you to go and try for that government loan to keep there business afloat 😮

[garn]

Re: service force

i realy need an reply from somebody please.

[garn]

Re: hoover OPH 614-80 Spare Parts no ?

Thanks martin

garn

[garn]

Which one to tackle first?

looking at the dirty state of the appliances .
i hope you don’t get what iv had.

the past six weeks iv been ill lost a few pounds headake virus
ended up in hospital very much IL

after a load of tests iv picked up some sort of dirty virus it could be from a dirty appliance or dirty wash juice.

the blinking virus ended up in my bladder and i lost 2 stone

know I’m using mechanics gloves and a gel hand alcohol cleaner or i will be once i go back still at home at the moment.

so be careful we all know that some of these homes are to dirty to wash your hands even after you complete the job.

i bet loads of engineers have left the job without washing there hands gone 2 miles down the road and been caught short for a leek
then got back in the van and lit a cigarette

garn

Edit: Moved at your request garn 😉

Don

[garn]

Re: Belling intergrated oven Element part ?

thanks seamy

Its A B&Q model mk1 or MK2

Garn

[garn]

Re: hotpoint door boot wire

Martin wrote:Have a read of THIS

hi martin every time i click on a link i get this ooPs error 404

of out on one this evening its a ind wm12x uk 2 different porthole sizes 2 different bands1 door boot with no detergent recovery and 1 with.
is the set up the same with hotpoint BWM 129 model for future ref.

Garn

[garn]

Re: Kwatt getting an ear full

Cest la vie.

You get them sadly.

He is being unreasonable though in many ways and we’ve so far dispatched or had dispatched two or three front counterweights within an hour of being asked for them.

Fact is, you look at the things the wrong way and they break.

k The Family concrete business is 500 yards down the road
if you send me the mold or a block IL get a few produced down hear for you IL even add fiber and Have them vibrated to get the air out That a must .
if the concrete blocks are under 4 weeks old they may be to fresh for transport if you crack one open ill bet its hot inside.
Tip store outside in the rain.

Garn..

[garn]

Re: Beko WM5100W – error – constant pump/drum rotation

I will look forward to hearing from you neon 3sp

[garn]

Re: Beko WM5100W – error – constant pump/drum rotation

Hi
Been out on a couple of these the past month.

iv had the same symptoms before and after a repair.

Iv Changed pumps carbons and a simple blockage. the last
was a start option switch cluster.

On testing the WM i found myself that it was behaving oddly especially the jobs on the carbons and the start control pad.

ex. Pumping rinsing on a separate spin.unable to cancel program
i thought hear we go again 😕

what iv learnt with the beko the past month is if the appliance has broken down mid cycle .
after repairing it that it stuck in cycle .
in these cases just leave it finish it may take a while because it may start a full wash again. have a word with the customer and give a courtesy call back just to check u may find that everything is OK and the cycle has finished.

Beko carbons totally worn out after three years washing for a family of 3 or 4.

Garn…
[size=50]don’t byte the hand off that feeds you try and give something back when possible :wink[/size]:

[garn]

Re: hotpoint wma 54 Aquarius 1200

to difficult And Time Consuming To desolder The selector Control

instead removed the white cover on the rear and its only 6 contact live & neutral in And the other 4 are just contacts
which turn with the roto diel depending on the program your using they have individual settings.

Basically its like a set of points on a car a good clean and make sure they are all touching with a good contact.

Its a fix 😀

Garn.

[garn]

Re: hotpoint wma 54 Aquarius 1200

Thanks Jim il crack on

paul.

[garn]

Re: hotpoint wma 64 1200

iadom wrote:WMA64 ???? Timer/Selector ?????

The WMA64 is an Ultima machine, all push button controls, it does not have a rotary selector. 😕

Jim.
my blinking Eyes No wonder i have a caps problem WMA54 Is The Model

[Author]

Posts