Forum Replies Created
-
AuthorPosts
-
garn
ParticipantRe: Domestic Appliance Testing
hi martin
i use a fluke Multy meter
A seaward pat tester and i have An Old Robin Meggaer Which I Droped A while Ago π‘And I buy Them from hear β‘ http://www.pat-services.co.uk/.
As for The Pic its A Dr who sonic ray three In one Screwdriver π
garn.
garn
ParticipantRe: Domestic Appliance Testing
Hears Something A Local Guy Uses to Test And Repair Appliances
he b.e.r. them and sells A recondition.does Any One know what It Is It very Impressive To The Customer http://www.ukwhitegoods.co.uk/images/us … 20tool.jpg
garn
garn
ParticipantRe: meggers
β as far As I Know That’s Its Against The Law To Work in Someones home Premises to Carry Out Work on Someones House Sockets or Change someones Light Socket.
Unless You Are A Qualified Electrician With A 17Th Edition Certificate.β so wear Do We Stand When You Disconnect A Hard Wired Appliance
from The Wall.β Are We braking The law Regs by doing That
garn
ParticipantRe: Pat Test Failure Whirlpool ADP4501/5
High Mike
You Got me There Original flex.I’m talking Through my Own Experience I Look After The local Comprehensive Appliances And The Special Needs handicapped center to.
Some of These Are hard Wired or have Extended flex .Il have To Dig Out The Info on This i have A Book On it Somewhere :rolls:
i also have A Traning disc Somewhere to. Give Me Some Time And Il dig It Out Maybe upload it to the tube And We All Can Have A look.
give Me Sometime Its been A Few Years since I Seen it.
garn
garn
ParticipantRe: meggers
Martin said. I’m afraid to say the answer to that for the most part is yes they do have to be removed and Disconnected.
Just Imagine you Just had A Call From A Customer my Machine is Making A Loud Noise Only On The Spin.
Engineer asks Whats The Make And Model
customer Says hotpoint wm
Engineer Give A Provisional Price Over The Phone And The Customer Has Accepted And Booked The Call.
Engineer On The way Thinking This Is A Good One Today££££ π
Engineer Arrives On Site Goes To Check The Bearing And Noticed At This Point The Appliance Is Hard Wired.
He Thinks That’s OK its Only The Bearing I Have Check And The On and Off Switch is Off.
So he bends Down to Check Spins The Drum he gets A wwwwwwrrrrr Noise And Then He Goes To Attempt The Six and 12 o’clock Movement On The Drum.On Checking The Up And down Movement he Gets A Mild Tingling On his Fingertips :rolls:
He Ignores That Or Dosent Know What it Is. he Carries On And pres is The Drum Down as he is CheckingTo Is Astonishment he Has to Turn Round To See Whether The Customer Is Hitting his Bicep With A Napping hammer π―
β Whats Wrong What hasent He Done before HE started.
Garn.
garn
ParticipantRe: Worst Week Ever
I’m A Sole LONETRADER :rolls: Myself
This Year is Different Than last quieter”recently Its The Time Of Year I Landed My Books on My Accountants Lap.
having A Think About This Years Turnover I Took A Good Look At This Years Accounts To my Astonishment my First half years Turnover Is On The Same Parr as Last Years Although Its quieter”
garn
ParticipantRe: Pat Test Failure Whirlpool ADP4501/5
Iv come Across the Same Problem in the Schools wear the caretakers or technicians as There called to day pat Testing They have These Expensive Instruments pat Testers and the appliance Are Showing Failed .
the rpe test is passing
R iso test is passing
but The leak test is failing Only because They don’t Know How to Make The calculation on The length of The Flex.garn
ParticipantRe: meggers
THANKS Martin The Info Will be usefull
I Use a Fluke ModelSometimes its A FLUKE Wheather I get The Appliance Going Again π
garn
ParticipantRe: Domestic Appliance Testing
Accidents can happen http://www.springerlink.com/content/8n6exf0bfyulkx5b/
garn
ParticipantRe: The fairer sex???
I see her As a Challenge i wouldn’t Mind tackling her π
never Played Much football Always had Holes In my Pocket πgarn
ParticipantRe: Creda W220VW (WE) Does new drum incl pulley?
i get Spares direct from Hotpoint Now & Again
The Price A Little Bit Cheaper Than Connect’s price and You Dont have To have An Account.Paul…
garn
ParticipantRe: BDW 060/A dishwasher
hi Garn HEAR
DOES Anyone KNOW Of A Universal Pump Number for This Dishwasher Its A brandt Part Number 32X0275 pump. To Β£ Dearthanks garn
garn
ParticipantRe: independant training
jackster wrote:Deffinateley Graham Dixon, I started by attending one of his courses about 6 years ago and its a really good course.
how much Β£ Is A Course β And how long with Dixons β
Paul..
garn
ParticipantRe: BDW 060/A dishwasher
thanks don iv had a look on the net cant find it even on manufacturers site.
bit of a problem with this i haven’t opened it up yet.
does Any one Fancy going on The Diagnostics With me It has A bit Of A simtum half way Through The Cycle π
Thanks paul..
garn
Participanthelo_75 wrote:worse than that… what the hell are these
cheap beko?
http://www.argos.co.uk/static/Product/p … searchtext>WASHING+MACHINE.htm#producttabsIts The new competition Against A good Repair With with Genune Parts
Customer says i Can get A new 1 for Β£50.00 More In Argos π₯
-
AuthorPosts
