[gegsy]

Re: hoover dies and trips fusebox when spinning stops

I would check the brushes, it could be carbon dust tracking over.
Unplug appliance before investigating further. If in any doubt please use the engineer link below.

Greg

[gegsy]

Re: Hotpoint Aqualtis

I think this should be move to “Off Topic” “Another Joke”, best laugh Ive had for ages 😆 keep it up guys.

Greg

[gegsy]

Re: Overactive Siemens

Had an Excell doing same stuff, found a tiny hole in door seal dribbling onto ntc and heater giving erratic ntc readings and earth leakage. Replaced both job sorted, but Im sure you’ve already meggered 😉

Greg

[gegsy]

Re: Samsung American water dispenser broken

Hi
All tech and diagrams are subject to copyright unfortunately. What I will say is that the front does come off, but its not for the faint hearted 😉
If you are in any doubts please use the engineer link below and remember unplug appliance if you going to have a go :plug:

Greg

[gegsy]

Re: Moth collection 😆

Some do, depends on what I deposit and manage to swipe 😆
Some weird and wondeful ones though, ugly devils huge with massive antler thingies and hard shells 😥

Greg

[gegsy]

Re: partfinder disc

iadom wrote:From the Indesit Company themselves, 🙄 Lasts about six months. 🙁

Thats longer than some of their machines 😕 😆

[gegsy]

Re: Moth collection 😆

No its not you Dave, we have a plethora of the buggers in the downstairs bog; all shapes and sizes, its like a scene from “The Birds” everytime you visit 😆

Greg

[gegsy]

Re: One of ours?

Being civil and talking to customers, and lets face it they do pay our wages; doesnt cost anything but it speaks volumes when they come to recommend a particular company to their friends. Will they ever learn 🙄 .

It does reflect a bit on UKW don’t you think, because they got his number off here, so they expected the same proffessional service that we give on here, I think that was the main shocker for jcrawford

Greg

[gegsy]

Re: Matrix MX194

Hya Alan
Its made by CDA but resembles so many other makes its unreal.
I would look in the base to see if its full of water as they usually are 😉

Greg

[gegsy]

Re: neff oven

They can be a bit fiddley, but 9 times out of 10 its just the hinges you will need.

Greg

[gegsy]

Re: Capital Repairs – Beware

jcrawford wrote:So at the end of all this I was charged £65 for him to tell me it ws broken, no kidding Sherlock! With just a little bit of customer service I may not have come out of this feeling like “they got there £65 for doing next to nothing and are not interested in fixing

Hi
Most companies charge the labour/call out on first visit as what tends to happen is that the customer either gets the information from the engineer and fix it themselves or they scrap it as in your case; in both instances its the engineer that suffers by way of no compensation for his time and experience. As for Capital Repairs, thats not for me to comment on I’m afraid but for those above.

Greg

[gegsy]

Re: Bosch KGV3120GB/01

If you do a search for KGV3120GB/01, all the info you need to complete repair is there.

Greg

[gegsy]

Re: idl705 indesit white marks on glasses

Do you use 3 or 4 in1 tabs??
If you do then you are most probably double dosing the salt action, which would give you this result.

Greg

[gegsy]

Re: Picture resize

Im getting worried about you Jim 😀 you starting to sound like Martin 😆 he must be rubbing off on you 😛

Greg

[gegsy]

Re: Bosch WFF2001GB/01 – Drum not spinning

Hi
Glad you sorted David, just gets a bit worrying when you get asked a basic task to change brushes thats all. Just trying to keep you and whoever else reads this post safe.

Greg

[Author]

Posts