[geoff1]

Re: Maytag G32026pelb

Hi

Yes it does. I found the information rhs behind the kickplate stuck in bag just above condensor coils. tight squeeze.

If they are not there let me know and I will see if I can get copy.

Easy to programme using switches

Geoff

[geoff1]

Re: Electrolux EW1006F

Hi

Thank you for help and information.

Will update later when part in

Geoff

[geoff1]

Re: Fridge thermostat

Hi
Many thanks both for reply. will give it a go tomorrow and let you know

Geoff

[geoff1]

Re: i need an obsolete whirlpool part !!

Hi Simon

Have you tried – dare I say – Ebay

The listing 190307825605 has 4 for sale or replacement for it

HTH

Geoff

[geoff1]

Re: CDA Ceramic Hob

Hi

Sorry about this one. I spoke to them today and now find there are two versions of this hob.

Controls up the side – should be 050039

controls along the front – 0010051

What a mess

Sorry

Geoff

[geoff1]

Re: Zanussi FJS1225W a/w

Hi

Have sent copy of manual

Geoff

[geoff1]

Re: AEG oko fav 4040 pnc 91123201401 on off switch

Try 8996461217607 and 8996461218407. With connect both these link to one item which is the catch and plate which they have in stock.

HTH

Geoff

[geoff1]

Re: Diplomat AAA1473 Induction Hob

Hi

Try this link and it may hold the answer

http://www.howtomendit.com/answers.php?id=202815

Geoff

[geoff1]

Re: compact cooker model bce 602 ss

Hi Ally

This Kompact cooker (sold by PAB ltd) looks the same as the CDA CC602SS which not only done for CDA but for Delongi etc. If it is the same the part number for the CDA/delongi unit is 074041

HTH

Geoff

[geoff1]

Re: Electrolux EWX14440W will not start

Hi

You are right about the drain for about the first 3/5 seconds. It does this to ensure it can drain and that it can detect a differental between its pressure switches before filling.
have you checked to ensure that the drain filter is clear (usually at bottom front of cabinet behind flap door? This will not help if clogged. If this is clear you will need to check drain hose output. Is it connected direct to pipework under sink? if so disconnect at that end and ensure that there is nothing blocking that end of hose.( dont let anyone use sink while doing this as you will have a flood on your hands.)
To check for water coming in turn off tap at end of hose, unscrew hose at washing machine end. Hold this end into bucket and slowly turn tap on again. water should come out at the same rate as it does from your tap at sink. If there is no/very little water then you have a blocked inlet hose or faulty tap. Check filter inside valve just where pipe screws on to the back of machine.
None of these checks involve removing lid or accessing the internal part of the machine [b]but in all cases remove plug before attemping any work on you machine.
I would suspect that if there is water to the machine and filter is clean then there could be a fault within the pressure switches or blockage in condensating chamber.

HTH

Geoff

[geoff1]

Re: CDA Ceramic Hob

No

The islands that I cover ( Bernary to Barra) are a bit more open minded about the Lords day and have no problems in getting a newspaper as long as the plane comes in.
I understand that things have kicked off on Lewis again as Calmac are going to start to run a ferry service there on a Sundays as they have to “comply with some EU regulation”. Watching that one with some interest to see what developes

Geoff

[geoff1]

Re: CDA Ceramic Hob

Hi Both

yep can be a bit windy up here more so as be are only 200 yards from the beach but we do get wonderful sunsets from the living room window.

Sorry to disappoint you Don but this man is welsh through and through which gets me in great debates with the locals when it comes to rugby etc. Its my partner who has got me here as this is where their family originated.

Diversity is the name of the game up here and always looking for new openings. Repair full range of domestic and commercial (except for gas as we only have LPG and not worth going through all the tests again), petrol lawnmower and strimmers, all types of power tools, plumbing, going to start PAT testing, was the island’s butcher until I fell out with shop owner as well as being casual Postman. Dare I say more.

If anyone is coming through they must give me a shout

Geoff

[geoff1]

Re: CDA Ceramic Hob

Hi

Part number for switches is 050039. Picture of part can be seen on connect or masterpart sites. I am sure it is a regulator as fitted to delonghi homark etc as well as CDA

[geoff1]

Re: Belling 334si cooker M/O ‘stat.

Hi
Try 082613452

HTH

Geoff

[geoff1]

Re: Neff H5470WOGB/02

Hi

should be 216063. BSH site now running ok to check

Geoff

[Author]

Posts