Forum Replies Created
-
Posts
-
Re: goatboy!
He does my area first thing Monday morning. He turns up with a van full of spares, which is very handy. I usually get to see him 9ish, and stock up on paper bags, sundries, cooker elements, etc.
I can’t believe he doesn’t know I’m Goatboy 😈 I’ll have some fun with him on Monday!
ps. Eddie, Phil Hawkins says ‘Hi’ to you last time I saw him 😀
Re: Whirlpool washer dryer AGW338 Problems
Penguin45 wrote:…induction motor…
😳 I didn’t look it up, obviously! 😳
Re: Hotpoint WMA62 Not taking in fabric softner
See if the water is coming through. Though if it wasn’t the machine wouldn’t finish it’s cycle 😕
I’ve had the too thick fabric softener many times, it sets before the final rinse. Then the water runs off the top of it, or picks it up in one set lump, and runs under it!
Are you near the bottom of the bottle of fabric conditioner? Do you shake every time before use.
Besides that I’d sugguest professional help… Repairs@
Re: washer over fill
The pressure switch on a washer rarely is faulty!
You must be kinda unlucky, but have clean socks now 😀
Re: Hotpoint WMA62 Not taking in fabric softner
With the age of the machine, it really shouldn’t have an electrical fault, but, you never know!
I reckon it’s probably the modern day unshuck fabric conditioner.
Put the machine on rinses, and when it’s filling on the final rinse (fabric conditioner rinse) open the drawer (this shudn’t get your carpet too wet) and see if the water is coming through OK.
If it is, I’d blame the conditioner being too thick! Try diluting it when you put it in at the start, and always shake it before use.
Re: Dear iadom (HPT WF…)
maltheviking wrote:WATCH OUT for the big heatsink on the power board DO NOT TOUCH IT for five minutes after mains disconection or it will kick.
I’m worried about the DIYers at home! 😯
Anyhoo, twas just in test mode, cheers Mike! :tup:
Re: Whirlpool washer dryer AGW338 Problems
It sounds like an underpowered motor, which could be the carbon brushes, except for…
Krissy wrote:…but on a heavier load there is a squealing noise from the top of the drum…
I don’t know what that could be! 😕 Unless there’s a foreign body in the tub.
Have you tried Repairs@ ?
Re: IPX4???????
I just got caught out myself 🙁
I needed a spare for a bissel shampooer. I turned it upside-down, what’s the model? There it is, IPX4… hang on!!! 😕
Re: goatboy!
:rotl:
alf_uckem wrote:…so i said, ” hi peter how are you?”
Was that Peter ‘Thank you’? QRS?
Re: AEG cooker
Got it! 😀 😀 😀
As soon as Goatboy senior decided to give me a proper product no. (944181727) it was kinda easy to find (8996619267611)
Communication problems! 😕
Re: Bosch Tumble Dryer
I think that’s a Whirlpool clone 😕
While we’re on the subject…
DON’T BUY INDESIT, SERVIS, and for God’s sake DON’T SHOP AT COMET, CURRYS or ARGOS
