Forum Replies Created
-
Posts
-
Re: Bosch waa24171gb/01 reset after brush change
Cheers Don,
Thanks for pointing me in the right direction.
I did a search while at the customers house and only the reset for spin buttons came up, thats why I posted.
I did manage to get it sorted just by trying different combinations in the end.
Thanks again.
NickRe: Hotpoint WM72 Control Module
Cheers Jim,
I’m sorry i didn’t acknowledge you earlier, been away for the weekend.
Much appreciated
NickRe: HJA 3380 or 3390 Lamona Oven Fan Motor
Already ordered with yourselves. Just got to get myself an account setup.
Many thanks
NickRe: HJA 3380 or 3390 Lamona Oven Fan Motor
Thanks for your help Seamy.
Looking at the two motor photos side by side they look miles apart to be fair. I cant find a part number thats valid to give you to look at but they do look different. Maybe the fixing are the same but at £40 its a bit of a risk if im wrong.
Cheers NickRe: Diplomat ADP5701 Grill element.
Yes, I ordered it yesterday and it turned up first thing this morning. I didn’t get trade prices yet but just glad it was available that quickly. I’ve got trade accounts forms to fill in and I’ll get an account sorted out.
Cheers
NickRe: Diplomat ADP5701 Grill element.
Cheers Jon,
I keep forgetting about AWS. I’ve ordered before and managed to get trade price discount, can’t remember what I did now. I’ll get in touch with them tomorrow.
Thanks again
NickRe: Ariston oven DOV317/1 Grill
Just bumping this back up again, i’m due to go tomorrow and was wondering if anybody could shed any light for me.
Kind regards
NickRe: Bosch SMV50E00GB/16
Great, that’s something to look forward to for the coming years.
I’ve loved working on BSH dishwashers but this looks like its going to be a real pain of a machine.
Any info would be appreciated Martin. Email is nickcowell@yahoo.com. Cheers NickRe: Beko Lamona Dishwasher HJA8362 – No heat
Just a quick update. I went back to this machine yesterday, armed with another PCB and NTC. Decided to go back to basics and lo and behold a broken wire in the door. Obvious I know, but never expected it on an 18 month old beko. I’ve had a few in the new hotpoints and the odd one in a whirlpool but not a beko as of yet.
Bekoboy, a test programme for this machine would really be appreciated mate. I sent you a pm with my email on yesterday, if you would be so kind.
Many thanksRe: Beko Lamona Dishwasher HJA8362 – No heat
Just need a bit more advice on this machine if anybody can help.
I went back yesterday armed with a pcb and an ntc. To cut a long story short, have swapped both and its made no difference. The programme just skips straight through without heating on any settings. You get a live and neutral on the heater but only for a very short space of time. Very little heat, to the point where youre convinced its heating but 5/10 mins later its no different. Then it empties and goes onto the next sequence. Heaters reading fine by the way. Connectors are fine.
Any help would really be appreciated.
CheersRe: Beko Lamona Dishwasher HJA8362 – No heat
I’d say £11.00 for a pcb is more than cheap. You would expect to pay £40/50 looking at it. I still dont know how a firm can manufacture a part like this, sell it on to a wholsaler, who them sell it on to us and still make a profit without the quality dipping somewhere along the line.
I too work on many dishwashers but tend to try and stay to the top end, bsh and Miele and shy away from the lower end beko, baumatic etc (Chinese) ones. I grant you the beko isn’t as bad as the others but I’m still not a fan.
NickRe: Beko Lamona Dishwasher HJA8362 – No heat
Just to update, the model was HJA8630, don’t ask me how she got the other number. I had a look at it yesterday and it is going through the cycle with no heat. Had a look at the pcb and there was no sign of dry joints. So I’ve ordered a pcb. Cant believe the price £11.64. You get what you pay for I suppose.
Re: Beko Lamona Dishwasher HJA8362 – No heat
All great advice guys. I’ll have a look at the pcb tomorrow. I’ve always tried to shy clear of the bekos so far but with howdens supplying them they’re becoming a lot more popular, so I thought I’d be better getting to know them a bit more.
The ones I’ve been to that have been leaking have all had clean filters, first thing I always looks for with having many hotpoint indesits overfilling. Granted the customer often cleans them before you get there, but the last one leaked after checking everything. Lasted 3 washes. Door did seem to fit ok. Didn’t notice anything particular but I will keep my eye open for it.
Again thanks for your help guys.
NickRe: Diplomat dishwasher – ACA9102 – Not programming
Cheers for all your help Kevin.
Youve actually, inadvertently, pointed something really important out to me. My email address linked the my website is wrong.
Ill get on to it straight away.
Is there any chance you could resend it to me pal.
appointments@arrow-electric.co.uk.I really appreciate your help Kevin.
Regards
NickRe: Diplomat dishwasher – ACA9102 – Not programming
Cheers for that, think i’ll go armed with a motor as well when I go back. You dont know the part number for the motor do you. The only place I can see it at is connect and they dont show part numbers. Its not listed at masterpart and qualtex under this model number.
Thanks again
nick
