[helo_75]

yup
plug out
back off
two bolts, take motor off
refit motor and belt
back on
wash clothes
its quite an easy task

[helo_75]

http://www.comet.co.uk/shopcomet/produc … NT-WML520P

dont make me laugh

buy a motor, itll outrun that hotpoint 5 fold

or, of course, while youre looking at price why dont you go for one of them cheap haiers, theyre REAL quality, and with you bein a single bloke, youll be able to let your washing build up while your waiting for the motor/pcb to come in stock, thats if the bearings dont collapse first

you really need to take a step back, and take some good advice

[helo_75]

rinse hold/crease guard isnt on is it?

could be a valve fault

[helo_75]

not pulled a wire off the terminal block have you?

thats the usual suspect

[helo_75]

not THAT bad, just time consuming

top off
split cabinet
remove back weight
remove fill hose
unhook door seal, take off motor, and wiring (make wiring diagram first)
remove sump hose

take pins out of suspension legs
pull sprigs off top of cabinet (v. heavy)

pull tub out, split tub , by undoing bolts

take off pulley, pull out drum, change bearings, reassemble in reverse order

take your time and be methodical, and youll be ok

hope this helps

[helo_75]

Re: warranty reg haier

:rolls:

amused you, did it?

😆

[helo_75]

and, erm, ahem, who sent you the tech info kwatt?

[helo_75]

bosch are about the best mate
stay away from that hotpoint/indesit stuff and youll get some lifespan

[helo_75]

its blocked….

go buy a proper one, they really were pants

it over runs because the theres no frost near the stat phile

it will never work properly again

[helo_75]

oops, its silver

[helo_75]

if you want a door, you can have one

is it white or silver?

[helo_75]

oh dear

ive had a few of them things blocked

its unlieley to be the thermostat.. its not impossible your wifes damaged a pipe when she cleaned round the back

is the ice on the back evenly spread, or is it concentrated on one area?

[helo_75]

well, it does!

it will stop while it reaches requires temp, if you activate the economy button, it will over-ride the heat cycle and wash with the water thats in there

hope this helps

[helo_75]

2801660101

its a wire loop, much like the zanussi idea, and you can, at a pinch slide it in throught the heater hole, if your careful

hope this helps

[helo_75]

there is a bracket for it

a lot of those came without one

the only way, other than ordering a bracket, is to bend the heater down, so it touches the outer tub
not always the best idea
ill try and find a part number

[Author]

Posts