Forum Replies Created
-
AuthorPosts
-
helo_75
Participantu tried the heater?
first thing to do is select economy option, and see if it goes through
if it does, its the heater, if not its the timer
helo_75
Participantyou really dont want to know how long we’ve been waiting for some of these parts
be warned, comet, being their biggest outlet, have most of the haier parts in the country, and as a rule last a day before theres none left
watchdog are active, trading standards know all about them, the clocks been tickin for some time
as you all know i have to be carefull what i say, but a 1000{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} markup wouldnt sell me these machines, ive seen too many upside down in the back garden where a certain emergency service have ‘placed’ them
derive your own conclusions from my comments, but i never thought ANY machine could make indesit machines look good, but these do it by a country mile!
has anyone seen one spin with clothes in yet?
helo_75
Participantdefrost it for 48 hrs
usually does the trick
other than that, if it persists, ull need a pcb.. run out around £50 i think, and may involve some wiring changeid try the defrost first
helo_75
Participantif your struggling, email me on ow643@aol.com
and ill send you a pdf manual by returnif you need it let me know!!!
helo_75
Participanthttp://shop.ukwhitegoods.co.uk/Washing+ … ensor.html
is the part
on top of the heater box, as you take the lid off, make sure its unplugged if your looking
helo_75
Participantdryer thermister – f13
easy repair £6 in online shop
helo_75
ParticipantRe: beko door seal
pup wrote:
abbots wrote:
hi,
can anyone give me the part number of the door seal on a WM810W please.
ta.
jk[/q
uote]
and good luck fitting it 😆so the point of this post was?
turns out i was right
helo_75
Participantneed the pnc to get the right number
on the inside of the door
helo_75
Participantand anyway, the part numbers imprinted on the front lip of the door seal, usually at the top
helo_75
Participantwm810w or wmb10w?
helo_75
Participanttheyre not spending
helo_75
Participantive seen that a lot
i change the top springs, and both dampers, and it seems to cure it
helo_75
Participantread it properly adam
helo_75
Participantyup, part of inner door
pig of a job
i got a spare one in the garage
helo_75
Participantcomets number is 08705 425 425
lol
-
AuthorPosts
