[helo_75]

just to clarify, are you changing the drawer itself , or the housing, with all the pipes/etc attatched?

ones really easy – the other ones an absolute nightmare

[helo_75]

then dont

split the money? so he gets half the spills and does nothing? doesnt quite add up

fire him off and contact the customer direct

[helo_75]

check your email my friend

i really hope thats what your looking for

[helo_75]

or a hole in the hose… always worth a look first!!!!!!!

[helo_75]

this one should fit , by the way

2040 Fan Element

[helo_75]

its a blomberg

comet machine, pretty old

its had a new element at some point, you can tell from the way its screwed on

the original part number for reference is 75×3520

i have an instruction book for the 3 knobbed version, not the 4

if you want it let me know your email addy and ill send it to you

hope this helps

[helo_75]

its an analogic switch, and will be at the top, near the pcb

[helo_75]

PE – the sensor pressure switch is out of order

according to my manual anyway

hope this helps?

[helo_75]

pull the door down

pull the hook from the back of the hinge over the tab on both hinges

the door will lock and lift off

refit the new hinges, but make sure the hooks are in place before you put the door back on, or theyre impossible to put back on (very tight but use a pair of pliers)

refit door, so groove fits into runner, open door fully, release hooks, job done!!

no need to go into cooker, unless your changing runners too

hope this help
s

[helo_75]

throw them at the wall?

dont do that, it isnt faulty

its usually because the cycling stat is faulty, and if youve changed them as a pair, then your fault should be cured

your burning smell? well, thats possibly just a littlebit of fluff on the element just look at it, and if theres fluff on it, gently hoover it or brusjh it off

would be worth chcking your condenser isnt blocked as well!

[helo_75]

a liittle of topic, but it showes where technology is going

http://www.comet.co.uk/shopcomet/produc … GRG227STBA

lol, there is a model up from this too,a nd that has a barcode reader on the front and a broadband connection

ive seen one.. and you know what? yep, in the morning.. message on the screen..’good morning mr xxx, your milk will be out of date today, and if you fancy a bite to eat, can we suggest…’ and then goes on to supply you with recipes downloaded from the net with all the ingredients it knows are in your fridge

of course you have to scan them as you put them in, or it doesnt work well…
and, of course, the machine will email the manufacturer and book a service call should a fault develop, and yes they will ring you at work , to confirm this is a suitable date for you

technology is fantastic, lets just hope it doesnt break down huh

as for the arcadia boards, theyre already out there

its a costing thing, as always.. all the eproms and boards will vanish by late 2008
indesit are already claiming good reliability, but then they do that all the time

[helo_75]

and then theres 2 types of board, and 4 variants of eprom to match either

[helo_75]

nope.. made for production only

sad, but true

no longer a viable repair

you could , however contact t_i_m, he did his welded tub bearings, and bored us to death for about three weeks with his exploits

theyre all going the same way

the hoover GO has one, indesit now have 2 variants

thats why there all under £250

sad really

[helo_75]

heater or motor

more likely to be heater.. has it been noisy lately?

[helo_75]

wow!!!

wheres philuk when you need him?

[Author]

Posts