[helo_75]

did you put an eprom in it?

u need to fit a programmed eprom to make it work

[helo_75]

tbh i never change them anymore unless theyre really bad

i just stretch and bend them into shape, theyre usually stronger

[helo_75]

you got it

without a word of a lie, i reckon ive changed 70 of them modules on those

ull need an eprom too, and its well hidden on partfinder

id check the brushes first, though

[helo_75]

ok
switch machine off
hold start and skip buttons in, turn machine on…. hold buttons for 8 seconds then let go

machine should go into diagnostics

press the cotton button, and at every press, a different component will be activated/tested

eventually an e number will come up

theres you fault

fault code list in the known fault code section

oh and after the fault code comes the pcb coding.. try not to change that.. to get back to normal turn machine on/off again twice

hope this helps

[helo_75]

i think smartin meant the other loser, that kr11664 or whatever

hey, thanx, sometimes, you just gotta say it as it is

[helo_75]

are you not a member of the trade section?

if you were, we could tell you how to go into diagnostics and find the fault properly that way

if you are, open a thread in there, or apply to join

thank you

[helo_75]

agreed

im just sick of the consumer rights brigade

it isnt fair to pick a fight with us for offering what should be impartial advice

like we made these appliances? nope, but we get dragged into the argument time and time again

[helo_75]

grrr… im trying not to, honest

you all know me… im trying not to be too hard on the public forums

lol

[helo_75]

i thought i did

[helo_75]

Re: Samsung RS21DGRS Ice Build Up problem

kr1664uk wrote:OHH HOW SWEET IT FELT TO WATCH WATCHDOG TONIGHT,,TO FEEL VINDICATED IN WHAT I SAID..LIKE I SAID,,THERE WAS A DESIGN FAULT AND THEY SHOULD NEVER HAVE BEEN SOLD..GUESS WHO WAS THE FIRST PERSON TO CONTACT WATCHDOG…LOL…
NOW WHAT HAVE YOU GOT TO SAY ….

what have I got to say?

well, ill run this by you

your an idiot, a first class fool, you have no respect from any trader on here

another ridiculous poster, i very much doubt you were the first person to contact watchdog

im sure you wont be the last…. i feel nothing but contempt for individuals like you.. why did you bother posting here at all? you got what you wanted and still you come back to mix it up just a little more

we traders know the issues with all appliances, and just because we dont fuel your fire, doesnt make us any less competent or helpful

what were we supposed to do? tell you your machine was crap and ring watchdog?

someone should lock this thread.fast

[helo_75]

like i said in my very first post!!!!!

glad u got sorted neway

[helo_75]

erm, except, like i told you, thats the wrong manual

the fault codes are different

[helo_75]

front of machine bottom right hand corner

theres either a flap or its behind the kickstrip

hope this helps

[helo_75]

like i said, pumps blocked, or duff, one or the other

usually something in the filter

sorry, but the last bit of the model number makes all the difference

hth

[helo_75]

ok, theres different models

yours must be a p1253gw/xeu ?

try these

1. An occurrence of an Error will make a sound of error melody for 5sec and continuously show one of the Error
Displays from the following errors. (But, Fault Check Led will flash for 0.5sec.)
2. All of the steering parts will be off at that time until that error was released.
3. Water Supply Error
– If there is no higher change in water frequency than 100Hz for 2 minutes during the initial time of water supply
and if water level doesn’t reach the preset level in 10 minutes, this error will occur.
This error will be released using Start/Pause button, which performs the initial condition of operation.
– Display : “4E”
4. Water Drain Error
– If water level frequency is still lower than the reset level frequency (25.20kHz) in 10 minutes after starting of
water drain, this error will occur.
This error will be released using Start/Pause button, which performs the initial condition of operation.
– Display : “5E”
5. Over Flow Error
– If an abnormal water level frequency is sensed (for occurrence of Over Flow :21.00kHz), Auto Power Off may
release this error and continuously progress water drain until the frequency reached 25.00kHz.
– If Over Flow is also sensed even after the following check of water level frequency indicating that error, it
functions to progress water drain.
– Display : “OE”
6. Door Open Error
– This error will be released by closing Door.
– Display : “dE”
7. Unbalance Error
– This error will be released by pressing start/pause S/W.
– DISPLAY : “ UE”
8. Water Heater Error
– This error will be released by turning off Power S/W.
– Display : “HE1″(Over Heat),
– Display : “HE2”, indicating no operation of HE.
9. Pressure S/W (Single Part Trouble) Error
※ Frequency signals(kHz) generated by water level S/W
– If the above frequency signals are displayed longer than 5sec, it indicates Pressure S/W Error.
– Drain water for 3 minutes for that Error, and turn OFF water drain pump. Pressure S/W Error
display “ IE” will be shown. .
10. Abnormal Water Temperature ERROR
– Water drain begins if abnormal water temperature is sensed at the initial time of water supply. If the frequency
higher than 25.20KHz is sensed, water will be drained by force.
– Display : “CE”
– This error will be released by turning off Power S/W.
Water Level Low High
Abnormal Frequency 30.00 KHz 15.00 KHz

[Author]

Posts