Forum Replies Created
-
Posts
-
ah yes, well, heaters a re a pig to put back in… as we all know
other options? kol, whys no one ever told me
id cancel the call, and do the 48hr defrost thing,with both doors open
its usually because the drain hole inside the freezer gets blocked full of ice and needs cleaning out.. quite often the defrost method works
its a known problem.. the pcb suffers from irregular defrost patterns, and the new pcb isnt guaranteed to be any better
from memory, the pcb is around the £40 mark, so if you want him to fit a pcb, itll cost you aroun d £120… but he probably wont defrost it for you, it takes a long time
hope this helps
thats unusual that, all our customers are adamant that the only way to remove that kind of mark is for us to replace it with a new, updated, more expensive carpet.
ouch, let us know how or indeed if they got it out
id feel round the holes in the inner drum first, sometimes, especially on a bosch machine, the wire sticks through and you can pull it out..
if not, you can try taking the heater out (power off) some are at the front some are at the back depending on model numbernope, itll be the float switch? ive had a few, and they do that and it been a sticky float switch
good luck getting to it
31000106?
r u sure thats the right serial?
and yes, thats the right p/no according to gias tech site
the ntc is on the pcb – it clips on to the side of the soap dispenser on the inside of the door
not available as a spare part, but it does unplug from the pcb should anyone keep one off another pcb with one of the other numerous faults those crap pcb’s throw up?
try a pcb
that particular machines suffer from irregular defrost patterns.. a pcb SHOULD help
further to that, whatever you do,a full, 48hr defrost with both doors open will be necessary, and will cure your problem short term
the pcb part number is 43X9136
hope this helps
who could say
my mates had his filter in his for 2 years now. i always say to customers you can tell by the taste of the water as to whether it wants replacing or not, or if the flow stops, its all down to individual requirements, as they say!
nope, its timed.. changing the filter makes no difference whatsoever
lets have a game of spot the con!!!
certainly the zanussi pump, as fitted on the washer dryer has a self resetting toc
that always explains the reason they dont dry, yet everything seems to work.. its because they cut out during dry and come back on when theyre cold, so usually it works on your visit (e30 isnt uncommon in diagnostics!), but the pump runs and empties fine so its its best to change the pump, or at least the base!
hope this helps?
nah, if u look under the plastic shroud on the door, theres 2 small holes, enuff to get a screwdriver in, and it will lever off, to get to the pcb, but its the other pcb, at the back thtas more likely to be the problem
in the meantime, if you press the top two buttons ( one at either side of the display)for 8 seconds, the display will flash, and , if theres a fault a segment should stay illuminated
let us know which one?oh r600a/macmini… where are you?
