[helo_75]

agreed… at least be honourable to the repairs@.. but then thats about the mentality of some people

i thought free estimates were a thing of the past
i NEVER ask anybody to work for me for nothing

[helo_75]

http://shop.ukwhitegoods.co.uk/Tumble+D … r+Fan.html

is the front one, part number 1703002

http://shop.ukwhitegoods.co.uk/Tumble+D … g+Fan.html

is the rear one, part number c00208040

hope this helps

[helo_75]

theyre both black

front of back?

[helo_75]

cant u do it jim?

[helo_75]

ive had that too.. it stretches just enough to twang as it rotates

[helo_75]

im glad you checked the drain pump

what about the circulation pump?

[helo_75]

is the fan running at all?

is the clock set to automatic?

has it been switced off recently, and not worked since switched back on? does it even have a clock?

[helo_75]

thats the usual scenario….

ive not seen any posts on here about changing capacitors…. i wouldnt recommend that route

just change both boards, that normally sorts em out

[helo_75]

erm… have you checked the circulation pump?

[helo_75]

ok, we’ll do this

ive been an engieer for 22 years

dont teach your grandad how to suck eggs sunshine, it aint recommended, ok?

being a member of the trade section, and of course being a fully qualified engineer for a major uk retailer, im not sure you telling me fault codes is relevant

ill say this once more, and this is fact.. it hasnt come from someone who hadnt go a clue and stumbled across a website and got lucky to find a broken wire

IF the machine has TWO thermostats on the back, then thats what they are THERMOSTATS, a CYLING stat and a SAFETY CUT OUT.. no ntc was fitted to that particular section of the dryer

if thats the case, the NTC was fitted to the front of the dryer, which you somehow managed to find

that might well explain why f13 wasnt shown – BECAUSE THERE WASNT ONE FITTED ON THE BACK

i see 2-3 variants of that dryer daily.. there is NOTHING you can tell me about it, or any other variants

i wont post again, and im sure youll retaliate.. people read this forum daily.. and feeding them wrong information is both dangerous and silly

[helo_75]

WRONG!!!

if it has 2 stats over the heater, neither are an ntc

one is cycling stat, the other a one shot

im glad you sorted it, but if your going to offer advice to others, makes sure its at least right

thanx

[helo_75]

http://shop.ukwhitegoods.co.uk/Washing+ … +Pump.html
is the common one, and even if it aint the right fit, you can change over the pump base

[helo_75]

its on a collet and a nut

theoretically, if you undo the nut it shoud slide off

but this is hootpoint we’re talkinabout

[helo_75]

common problem

clear the sump hose and all will be fine

rear access panel off, black pipe from drum to pump

will be full of fluff and stuff

plug out, of corse

[helo_75]

its f03

thats the ntc faulty

does it have 3 thermostats over the heter or just 2?

[Author]

Posts