[hilly]

Re: whirlpool d/w adp4601

cheers i will check it out

[hilly]

Re: whirlpool 6th sense awm 8163

valve seens fine, flowmeter is clear it seems to do a boil wash ok but on other washes it seems to stop on the rinse with hf flashing just priced up the valve, flowmeter and pressure switch and they are about £30 each non returnable so if anyone has got any ideas would be grateful

thanks paul 😉

[hilly]

Re: hoover al130 part no req

that was quick!!!!! thanks chris 😀

[hilly]

Re: zanussi zwf1217w

cheers baron i tried that and even turned it off at the mains for a while to see if it would reset itself but no joy,

thanks paul

[hilly]

Re: zanussi zwf1217w

delay timer i first thaught that but how do u remove it? no buttons seem to change anything.
cheers baron,

[hilly]

Re: aeg favorit 507501d dishwasher

heeelp im going back on fri for another look any info would be muchly appreciated 😕

[hilly]

Re: hotpoint 31330 vtd00p

new drum eh? sounds an expensive repair.

ta paul

[hilly]

Re: Hotpoint Ultima SDW80 – Unresponsive Controls

hi got the same fault with one of my customers machine did anyone get any further with this if not im thinking like you and going to send them down the 5yr gtee route!

thanks paul

[hilly]

Re: hotpoint bwd129 w/d

thanks jim guess this is a job for emw then!

thanks paul 😉

[hilly]

Re: electrolux eob2610w wiring diag req

thanks for trying 😉

[hilly]

Re: SMEG A1/2 strange fault?

thanks youve saved the day again i missed the simple thing and looked at the clock but on return visit the mains block was starting to melt out thank god i asked on here first or i could have been stuck with a expensive clock!

thanks again paul

[hilly]

Re: SMEG A1/2 strange fault?

thanks for advice

paul

[hilly]

Re: hotpoint wd61

thanks for replies i will double check all those 😀

thanks paul

[hilly]

Re: old hotpoint d/w

thanks for replies ill give it a go it looks like its been leaking from there but sods law didnt leak when i went to it so im just waiting for the call at least ill be prepared thanks to ukw replies 😉

thanks again 😀

[hilly]

Re: white knight t/d

thanks for the replies i finally gave in and my friendly local serviceforce engineers took a look with me and it was the timer at fault not running the pump enough!!

thanks again paul

[Author]

Posts