[hilly]

new style bosch dishwashers

Been back today and it ran 2/3 of the way thru a quick wash but no heat, then it came up with e02 which I think is same as e01 power module, so guess its that, tested heater all ok, do the modules come ready to go?

Cheers paul

[hilly]

new style bosch dishwashers

It’s just showing 1 min no E I managed to get It running but after a few minutes it stops and goes to 1 min, not sure which ones are the heater terminals to test looks like I’ll have to strip out the heater/pump to investigate.

[hilly]

Hotpoint wmf740 dispenser

Cheers jim, I’ll make a few enquiries tomorrow and keep banging my head,
Thanks again, paul

[hilly]

Hotpoint wmf740 dispenser

Cheers got some more numbers to go at,
wmf740k
909299134
195078654.00
Cheers Paul

[hilly]

siemens hbs50550b/02 oven

Yep, ducts clear but I’ll check the housing and possibly drill some vent holes to see if it helps, many thanks

[hilly]

Haier hw-c1470tveme-u e3 error

Not that I know of I’ll check with the customer,
Many thanks bob

[hilly]

Smeg D1612A1 built in (D/W)

eastlmark wrote:well Lawrence, just invest in the proper tool if a bit of chain is not up to your standards 😀

that looks a expensive bit of kit! I usually manage with a length of wire, grips and brute force, I like the bar and chain idea tho 😉

[hilly]

Re: slimline bosch d/w srs45e38gb/01

its complete, works just like the other style, its part no 607138, every day is a school day 😉

[hilly]

Re: slimline bosch d/w srs45e38gb/01

leavemetogetonwithit wrote:So you noted the arrow on it?
Mike.

this one can only go one way, it attatches to the bottom of the plastic metering tank held on with a metal clip, its not the circular one that fits in the base connected with the hoses,

thanks tho 😉

[hilly]

Re: slimline bosch d/w srs45e38gb/01

cheers, the impellor jug can only go on one way its one thats attatched to the bottom of the fill tank, looking like module then.
thanks again.

[hilly]

Re: hotpoint sy10x dead clocks

thanks for the replies, all mine were dead, new clocks fitted all ok now, just seemed strange 3 having the same fault. must have been a dodgy batch, they were all bought at the same time.
thanks again

[hilly]

newworld dw60 e3

Cheers, checked them all clear I’ve quoted for pcb but he’s on about getting a new one cos he’s not impressed with the quality of this one lol

[hilly]

howdens hja 8703 washer/dryer

Cheers gonna strip it out to check that, going to pick it up later, it’s in the smallest kitchen in the world on the 3rd floor with no lift 🙁 oh the joys

[hilly]

Re: neff s4443n6gb15 dw not stopping?

cheers martin,
ill pass them back to neff then,

many thanks paul

[hilly]

Re: smeg df614we dishwasher e9

going back on tuesday, any ideas welcome, :haier:

cheers paul

[Author]

Posts