Forum Replies Created
-
Posts
-
Re: Hotpoint WD860 error codes
F11 is also pump related, it means it is not emptying correctly. More blockages, something right inside the pump stopping it, outlet hose blocked under the sink, intermittant pump failure etc.
Jim.
Re: Hotpoint FDW80P AL05
Board & NTC come together. The PCB has been altered a couple of times on these. Need full serial number to ID. One other slight problem 😥
The earlier board is over £50 list ex vat, the later one just over £20.00 but it does appear as though the latter needs an eeprom as well.Jim.
Re: Refraction – the bending of light.
Has anyone asked winker if he would like or need trade access, looking at his earlier posts indicates more than a passing interest in whitegoods. 😉 Or has he got it but is posting in the wrong place?
Jim.
PS. At least he knows how to spell integrated 👿 8)
Re: Hotpoint and Servis
PIP-pm- wrote:Wouldn’t that be merloni and servis then
Or even Merloni & Merloni 😉
Re: T/Bendix D/Washer DH101
eastlmark wrote:Mind you, door could be bent.
To be honest, if she takes care when opening it I cannot see a problem, door looks fine and closes perfectly, it drops down level as well.
Jim.
Re: T/Bendix D/Washer DH101
macmini wrote:
Of course, the person will have ‘accidently’ fallen into the dishwasher!
You know, like you do.
Such cynicism from one so young, 😆
Jim.
Re: Indesit W103
Plenty of ‘clues’, far to many in fact. 😥
You need to watch the mains neon, when the control knob starts to go round, count the number of flashes between pauses and report back.
Just keep your fingers crossed that it isn’t 8 flashes. :rolls:
You could do a forum search for , “flashing Indesit/Ariston/Hotpoint” but you might lose the will to live if you try reading them all. 😉
Jim.
Re: Just to say cheers !
gegsy wrote:
any other problems pleas don’t hesitate.You could offer to sort his rodent problem out Greg. 😆
Jim.
Re: Hotpoint Aquarius overflowing
There are several things that could cause this, very diffcult to diagnose from a distance. It could be an internal hose or fixing that has come adrift, blockages in the water control system, faulty inlet valve etc, etc. An examination of this machine is the only way to be certain, please remove the plug before opening up or try the link below. Also worth remembering that you do have 5 years parts gaurantee on this ‘Indesit’ dishwasher.
Jim.
Re: Hotpoint Aquarius FDW60
Neons 4+ 6 indicate a heater related fault. The heating assembly is a known weak point on these Indesit machines. The only way to be certain is to check all the components involved with the correct test equipment.
Please remove the mains plug if you intend to proceed or try the link below to see if we have someone who can help.Jim.
Re: T/Bendix D/Washer DH101
Cheers Mark, I got the impression she was angling for me to BER it, already had the insurance company form filled out. 😯
Jim.
Re: Htpt dwf40 s/n 26700800
Fits about 19 or 20 different models AFAICS. So should be OK. Later DWF40.2 has a later module.
Jim.
Re: Hotpoint wd440 & w/knight pts?
effzedarr wrote:Many thanx Jim, the stat looks like a 1 shot, motor had siezed, it kept heating hence stat gone pop!Do you have any idea about that w/knight belt, there seems to be so many listed [well 2or 3], might have to get customer to bring old belt in if no luck.
cheers Chris..Pass on the belt, not my area of expertise. 😳
Jim.
