Forum Replies Created
-
Posts
-
Re: Place Your Bets
gegsy wrote:I only chose June 26 cos its my birthday 😆 how lucky is that 😛
Greg
Damn, trust me to be born on the 16th of November 😥
well done Gegsy all the same. 8)
Re: wm 52 hpt
Bryan wrote:Masterpart have 1604822 on special offer at £34:99 , now that really is a bargain :D. Don`t know what you guys pay for ARM20 but surely the new motor at that price is better all round.
Bryan
Not always, if the machine has a pecker door release then you cannot use that motor on its own, there is nowhere to mount the two earlier pecker types. You then have to have the kit.
Re: wm 52 hpt
eng14 wrote:thanks guys ,iaddom when u say cut the lugs off i presume u mean on rast plu so it enters wiith lug edge opposite to grooves in motor plug,if this works why buy 1604976 and what do u get in kit for your money,how much.why dont they leave things alone,with gec motor,bet indesit are lurking somewhere,thanks richard.
I very rarely fit complete motors but I had to use one last week due to ARM 20’s being out of stock., ( I have been promised delivery next week )I always reverse the motor plug after removing the small lugs on the Rast plug. This is standard practise amongst most Hotpoint engineers as well.
The easiest way is to note which two wires go to the tacho and make sure that you have them lined up.The FHP motor came into to general use long before the Indecent Company got their grubby paws on Hotpoint.
Re: Hotpoint WF640 Fault F-10
Apparently the pressure switch is not sensing. It could be a faulty pressure switch or owing to the fact that this machine has Indesit electronics inside it could be several other things as well 😥 Please make sure you remove the plug before poking around inside or try the link in my sig to see if we have someone who can help you.
Re: wm 52 hpt
Motor fixing kit is a 1604976, however if you remove the lugs, invert the plug then affix a label so that anyone who repairs it in the future, who is careless enough not to note the position of the plug before removal will be forewarned.
Or better still use an ARM20 armature from Qualtex, new brushes and a TOC17 if the overload has blown.
Re: Two site members get married!!!!!!!!!!!!!!!!!!!
Seems it was all over by breakfast, Bryan dined alone. 😆
Re: dishwasher leak due to Finish 4 in 1 tablets!
A very well docmented problem, more so on certain models. The best advice you can give your customers is to use separate detergent, rinse aid and salt if required, or better still get them to try Fairy Active Bursts, they will notice the difference.
Jim.
Re: Yet another Hotpoint FDW60 Error Code
Hotpoint’s labour charge is just under £90, not £150.
From the left which number neon is on ?
Re: Hotpoint DWF40 – Prewash & Wash Error LEDs ?
Thanks for letting us know the outcome, it is wise to rinse all dishes etc before putting them in the dishwasher.
Re: ISE website
just noticed on the ISE website that if you go to Trade Login it says
Userame not Username . Small detail but needs attention.
Re: MD Monthly Update
Its late and I have had a taxing couple of weeks but I couldn’t resist being a pedant, 😈 as the thread title is ‘Monthly Update’ are we not a little overdue, sorry John, just my warped sense of humour 😆
Re: Ariston Margherita LBE 12X
Full serial number would be a help for this Indesit clone 😥
Also when the control timer rotates, the mains neon indicator should be flashing, count the number of flashes between pauses as this is an error code.
