Forum Replies Created
-
Posts
-
Re: Philips AWB 066
Feared as much, old bloke living on his own, just been fitted with a hearing aid at the age of 92 😯 , he looks in tip top order and apart from the weight so does his machine, ah well. 😥
Re: Indesit W123 UKBG
Dave_Conway wrote:Ah, is this the one with the curved bracket thing that’s bolted to the bottom of the drum then the motor bolts to that ?
C00066074 = “cradle set outer” if it is, I hope that contains the part you need as well, if not I’m goosed on this one.
Dave.
If I enter that in W123 it comes up as ‘Not Found’ it is in the W133 parts list though, doesn’t look much like a support leg to me. ❓Might be time for the trusty digital camera. 😉
Re: Hotpoint built-in oven Model SD98PI
You’ve just done it. 🙂
Every time a new post is added to a thread it goes back to the top of the list, below the ‘sticky’ threads.You may get lucky but cooker wiring diagrams will be thin on the ground. 😥
Re: Indesit W123 UKBG
Need exact serial number, different motors,drums and mountings.
Also is it a W123UK BG/M or BG/P ?
Partfinder lists W123UK (BG) but comes up with ‘No Parts Listed’ ❓
Re: Hotpoint built-in oven Model SD98PI
Direct contact with Hotpoint may be your only option if you don’t get a reply soon. The only cooker manuals I have are several years old. I have deleted your duplicate post from three days ago, if you want to ‘bump’ a post please use the original one, it helps to keep things tidy. 😉
Re: Bosch WFB 2005 washing machine – doesn’t spin
You are thinking along the right lines 😉 , please remove the plug before proceding further. :zap:
Re: INDESIT Washing Machine DOOR Parts
Are you sure, handle kit is around £5.50 to £6.00 +vat. Door assembly is only available as a complete unit, part number C00112088 about £35 to £40.00 + vat. 😥
Re: INDESIT Washing Machine DOOR Parts
Part number is a C00096865, an e mail to spares@ukwhitegoods.co.uk should do the trick.
The one in your link is the wrong one. 😉
Re: carlton dishwaser
Full model number and serial number if you can please. These are made under license for Currys if my memory is correct, ( if not its Comet ) they could have different manufacturers.
Re: WASHING MACHINE IS DOING SOMETHING STRANGE!
If the ends of the brushes are nice and shiny then they are OK. Back to one of my earlier questions, what happens if you set it to rinse & spin, or spin only?
Re: WASHING MACHINE IS DOING SOMETHING STRANGE!
JM wrote:Can you explain how I check the brushes?
We cannot go into chapter and verse for safety reasons, suffice it to say there are two brushes in the main motor.
As an afterthought, has the machine been very noisy recently?
Re: Hotpoints new Parts policy
wilf wrote: Ive also had boxed motors secondhand
I was always amused by the label they included in the 161408 & 161410 motors that came out supposedly as new, they had in fact had new armatures & brushes fitted to old motors. They were not reconditioned or refurbished, oh no, something much grander, they had been ‘recycled’ 😆
