Forum Replies Created
-
Posts
-
Re: Hotpoint/Ariston washer/dryer CAWD 129EU
From your IP I am guessing you are in France, also the EU at the end of the model number suggests a non UK machine.
Sadly that model number does not relate to any of the technical information we have for UK sold machines.One of the more recent types of error code displays does flash a full row of lights along top or bottom but the error codes on these is shown by a combination of the right hand vertical lights staying on and not flashing.
Re: AEG Competance oven cutting out.
Turns out this oven does have the small, two blue, two white wire ‘cut in’ doofer the larger Lux group ovens have.
8996619267611 sorted it. 8)
Re: hotpoint oven doors
Only these models plus SY56 have the same inner door and hinges as your oven, SY37 is different.
Some of those will be white and brown as well.
Re: hotpoint oven doors
❓ The official parts identification software does not show an SY32X or even an SY31X It only shows the ones listed here..
Have you got the serial number and commercial code from the rating plate?
Re: ZanussiZWF1451W
I double checked all the wiring on the previous one with an identical fault, meggered everything to no avail.
TDS docs suggest possible pcb fault if everything else checks out, thats when the previous customer bailed out. 🙁
Re: ZanussiZWF1451W
Did you ever sort this Dave, I now have a ‘similar’ fault.
Model ZWE1640W, pnc:914517517.Set to wash programme, time shown in display, press start and door locks and drain pump kicks in. After about 45 seconds the progress lights go out, door unlocks and 0 appears in display, no error code?
Diagnostics throw up E34 pressure switch side faults. I do have a new anti boil pressure switch as a result of not being able to cure this fault on one about three years ago even after changing both pressure switches at the time. Tried that but no different, main pressure switch appears to be OK.
It will fill and wash fine on rinse programmes. 😕
Jim.
Re: In search of the fourth cord
Who is simon26r,? trade member since 2005 but hardly ever posted, last few weeks all over the forum like a rash. 😕
Re: ISE T25wc dryer fan
Moved to correct forum
Do you have access to the ISE forum, all manuals in there.
Re: Hotpoint 17450 motor cutting out
Actually I’m fairly sure I do have a 170001 relay, but I have no idea where it is. :clown:
