jason1970

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 104 total)
  • Author
    Posts
  • in reply to: Hoover DYNS7144DIS/1-80 #434521
    jason1970
    Participant

    Re: Hoover DYNS7144DIS/1-80

    I’ve had 3 or 4 of these. Often after the E03 error appears and the customer tries to select another programme and E16 appears (heater fault). Neither of these faults actually appear, ie the pump does drain and the heater does heat but the errors still appear. I have changed the heater each time and it has fixed the problem.

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431113
    jason1970
    Participant

    Indesit/Hotpoint/Creda Dryer Recall

    Evening Gents

    On the news tonight that Whirlpool are recalling many of the groups Dryers, both Venting and Condensing due to the risk of fire caused by fluff coming into contact with the heating element.

    Do any engineers out there know what the recall is going to involve, what is going to be done to the dryers? They are staying it will take about one hour to complete the recall work?

    I know I’m going to get so many questions about this over the coming weeks!

    Thanks all.

    Jason

    in reply to: John Lewis (Electrolux) Dryer JLTDH15 (916096804-00) #432115
    jason1970
    Participant

    Re: John Lewis (Electrolux) Dryer JLTDH15 (916096804-00)

    To conclude this one.

    After kindly being sent a manual. I went fully into the diagnostics and, whilst still slightly ambiguous, error seemed to point to motor triac and therefore, motherboard. The estimate to repair was more than the customer wanted to pay so we have quoted for a new Bosch dryer.

    in reply to: John Lewis (Electrolux) Dryer JLTDH15 (916096804-00) #432114
    jason1970
    Participant

    Re: John Lewis (Electrolux) Dryer JLTDH15 (916096804-00)

    Hi Seamy

    Yes striker is fine and door closing. I’ve been sent a manual so I’ll study that and see if it becomes clearer!

    Thanks

    Jason

    in reply to: Beko washing machine wmb81445lm #431764
    jason1970
    Participant

    Re: Beko washing machine wmb81445lm

    No problem ddirect. Did you sort this one in the end?
    I like to hear the end of the story? 😉

    in reply to: Beko washing machine wmb81445lm #431762
    jason1970
    Participant

    Re: Beko washing machine wmb81445lm

    Bekos always seem difficult to cancel the programmes, especially if there is an error state, ie brushes worn or water in the drum. Always worth checking the brushes on these! Good luck!

    in reply to: Electrolux Washer Dryer Prod No. 91460600(01) #429749
    jason1970
    Participant

    Re: Electrolux Washer Dryer Prod No. 91460600(01)

    Hi eastlmark and others

    Sorry, forgot to update this one!

    It WAS a faulty module, and I did get a refund so lucky on both counts!

    Since this job I’ve had two more electrolux machines with the same fault. This year I have replaced FIVE modules! All on integrated washer dryers, there must be a massive problem with them!

    Thanks again for the comments

    Best wishes

    Jason

    in reply to: Electrolux Washer Dryer Prod No. 91460600(01) #429746
    jason1970
    Participant

    Re: Electrolux Washer Dryer Prod No. 91460600(01)

    Morning Gents

    Thank you for the replies, sorry I was unable to log on over the weekend.

    Eastlmark. Thanks, that is the correct product number. I’ve had two previous AEG branded integrated washer dryer with same fault, both were repaired with new modules so I hope yours goes the same!

    Bazza500 and Bluephill. Dryer elements definitely ok and I have unplugged them and tried machine and get identical error. Not sure how to put this machine into diagnostic mode? But not sure even if I could it would help as the LCD display just has random sections lit. Also as I rotate the programme selector switch I either get no indication on, just the start button lit red or the random LCD display. Very strange and certainly looks like a faulty module. This machine does have a second much smaller dryer module, could this have any affect on the new module? Not ever had one of those fail before but I don’t do that many Electrolux machines!

    I guess I’ll have to order a second new module and keep my fingers very firmly crossed unless anyone has any other idea??

    Thanks again for your help

    Jason

    in reply to: Electrolux Washer Dryer Prod No. 91460600(01) #429742
    jason1970
    Participant

    Re: Electrolux Washer Dryer Prod No. 91460600(01)

    Hi Bazza500

    Thanks for spotting that! I was in rush yesterday when I posted. I haven’t got my job card with me at the moment but I think I’ve missed off as didgit after the 00. I’ll repost the number as soon as I can.

    In the meantime, have you got any ideas???

    Thanks Jason

    in reply to: Indesit IWDC6125 #428275
    jason1970
    Participant

    Re: Indesit IWDC6125

    Thanks Iadom

    So many different methods of indicating errors!

    Thanks for your help.

    Jason

    in reply to: Washing Machine stuck in wash cycle. Please help ! #428233
    jason1970
    Participant

    Re: Washing Machine stuck in wash cycle. Please help !

    99 times out of 100 with these machines and this fault it’ll be the wash element.

    in reply to: AEG L11842VIT integrated washer dryer #427390
    jason1970
    Participant

    Re: AEG L11842VIT integrated washer dryer

    Hi Dave

    Finally got back to the job and pleased to say the new module did cure the problem!

    One happy customer and one relieved engineer!

    Thanks again for your help!

    Cheers

    Jason

    in reply to: AEG L11842VIT integrated washer dryer #427389
    jason1970
    Participant

    Re: AEG L11842VIT integrated washer dryer

    Thanks again Dave

    I used the 914….. number to identify the correct module, which fortunately is pre-programmed!

    I appreciate your help. I’ll let you know the outcome. The job is booked back in for Thursday.

    Cheers

    Jason

    in reply to: AEG L11842VIT integrated washer dryer #427387
    jason1970
    Participant

    Re: AEG L11842VIT integrated washer dryer

    Hi Dave

    Really appreciate your advice and prompt reply. The machine is in an up-market lodge and guests may leave it on for months!

    Many thanks

    Jason

    in reply to: BEKO WM95135LB #424058
    jason1970
    Participant

    Re: BEKO WM95

    Thanks Chris

    Appreciate the detailed answer – I’ll be better armed next time!

Viewing 15 posts - 16 through 30 (of 104 total)