jason1970

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 104 total)
1 2 3 4 5 6 7
  • Author
    Posts
  • January 29, 2015 at 7:07 am in reply to: BEKO WM95135LB #424056
    jason1970
    Participant

    Re: BEKO WM95135LB

    The 2844290100 INPUT IMPEDERENCE INDUCTOR is also out of stock in the UK, customer not prepared to wait so job completed without a repair.

    Thanks for all the advice, I’ll put this one down to experience!

    January 28, 2015 at 7:46 am in reply to: BEKO WM95135LB #424055
    jason1970
    Participant

    Re: BEKO WM95135LB

    Seamy

    Motor is out of stock at moment – no UK stock – so that may be lucky for me! I’ll take your advice and let you know the outcome.

    Thank you for the reply!

    Jason

    January 26, 2015 at 8:11 pm in reply to: BEKO WM95135LB #424053
    jason1970
    Participant

    Re: BEKO WM95135LB

    Thanks Ray

    This machine is a 9kg black model that was quite expensive for a Beko. Cust MUST have black so does want it fixing. Looks like I may have to bite the bullet and order the motor – wish me luck!

    If I do fit it I’ll let you know the outcome

    Thanks

    Jason

    January 26, 2015 at 9:40 am in reply to: BEKO WM95135LB #424051
    jason1970
    Participant

    Re: BEKO WM95135LB

    Thanks Ray.

    That’s my fear. At no point have I seen the motor turn. Have you ordered a motor yet?

    No error codes displayed Chris. Can you tell me how to enter diagnostics?

    Much appreciated both

    January 26, 2015 at 7:48 am in reply to: Miele Novotronic W833 #421331
    jason1970
    Participant

    Re: Miele Novotronic W833

    Sorry for late posting.

    Pressure switch fitted and problem better but still intermittently. Customer happy to use at present though.

    November 13, 2014 at 2:42 pm in reply to: Miele Novotronic W833 #421330
    jason1970
    Participant

    Re: Miele Novotronic W833

    Thanks Martin. Meant to reply sooner! Pressure switch ordered I’ll let you know the outcome.

    Many thanks

    Jason

    June 2, 2014 at 6:16 pm in reply to: Hotpoint VTD00P #414757
    jason1970
    Participant

    Re: Hotpoint VTD00P

    Thanks Jim

    Email sent.

    April 11, 2014 at 6:59 am in reply to: are things really that bad? #412011
    jason1970
    Participant

    Re: are things really that bad?

    Glad it’s not just me quiet! We had a very busy start to 2014, everyday fully booked. Last week dropped off and this week very slow.
    I’ve been self-employed for 26 years and I still can’t figure out a pattern and why you can go from a busy week to a quiet week for no obvious reason???

    February 17, 2014 at 8:10 am in reply to: Bosch wap28360gb/14. Fd 9208 200050 #409569
    jason1970
    Participant

    Re: Bosch wap28360gb/14. Fd 9208 200050

    Hi nomadPaul

    How would you get to the test programme on this model?

    Thanks

    Jason

    January 29, 2014 at 9:20 am in reply to: whirlpool AWOE8548 (Sixth sense) #408266
    jason1970
    Participant

    Re: whirlpool AWOE8548 (Sixth sense)

    ‘Dispenser circuit error’ is what I have listed in my guide but that may not be specific to that whirlpool model. Hope it helps!

    January 29, 2014 at 9:17 am in reply to: Hotpoint TVEM70C vented dryer #408166
    jason1970
    Participant

    Re: Hotpoint TVEM70C vented dryer

    I used to chisel off but now always drill, it is neater and no risk of damage to the drum. I always fit the V4 complete kit, C00113038 and charge accordingly. To be fair it is a good repair and will give the machine a new lease of life!

    January 29, 2014 at 9:10 am in reply to: Beko tumble dryer – DVTC60W – stiff drum #408529
    jason1970
    Participant

    Re: Beko tumble dryer – DVTC60W – stiff drum

    Front seal probably the cause. I have had these ‘stick’ to the front of the drum causing the drum to seize and the belt to snap.

    January 28, 2014 at 5:03 pm in reply to: Bosch WKD28350GB/01 #408517
    jason1970
    Participant

    Re: Bosch WKD28350GB/01

    Thanks Tim

    Waiting to hear back from customer. If I get back to the machine, I’ll post the outcome.

    Cheers Jason

    January 28, 2014 at 9:03 am in reply to: Bosch WKD28350GB/01 #408515
    jason1970
    Participant

    Re: Bosch WKD28350GB/01

    Thanks nomadPaul. That’s always the worry! I’ll explain the same to my customer and let them decide.
    Thanks for the info, much appreciated!
    Jason

    January 27, 2014 at 8:46 pm in reply to: Bosch Condensing Dryer : WTE86304GB/05 Steams Up #408338
    jason1970
    Participant

    Re: Bosch Condensing Dryer : WTE86304GB/05 Steams Up

    definitely check the cooling fan!

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 104 total)
1 2 3 4 5 6 7