Jazzmeister

Forum Replies Created

Viewing 15 posts - 136 through 150 (of 178 total)
  • Author
    Posts
  • in reply to: L.G washer #302516
    Jazzmeister
    Participant

    Re: L.G washer

    Bearing seals sometimes squeal on these…could be that???
    Or bearing/shaft broken and hitting drum seal maybe?
    Oh and the paddles make a weird noise too sometimes….lol

    Hope this can help

    Jazz!

    in reply to: Baumatic BDW13. #302430
    Jazzmeister
    Participant

    Re: Baumatic BDW13.

    yes this is common….the motor with ANY earth fault will shut down the board!So the diagnosis is probably correct.
    Problem is these things leak for a past time…so expect to return…Mwhahahahahahahahaha 😈

    Jazz!

    in reply to: New World DW60 (Stoves) #302445
    Jazzmeister
    Participant

    Re: New World DW60 (Stoves)

    DW 60 sounds a bell….is it a haier type…if so check the 2 safety cut ots underneath 1 will be o/c

    Jazz

    in reply to: Flavel Aspen 100 #300298
    Jazzmeister
    Participant

    Re: Flavel Aspen 100

    Usually these are quite common they have a thermal fuse attached at the rear…it looks like a normal wire but within that there is a resistir looking fuse attached and thse go all the time!!

    Jazz!

    in reply to: LG WM1480 FHD washing machine showing ‘DE’ #300370
    Jazzmeister
    Participant

    Re: LG WM1480 FHD washing machine showing ‘DE’

    DE= Drain error

    LE = Lock Error

    UE = unbalanced loads…hope this helps…..check the pump!

    Jazz!

    in reply to: best toolboxes? #275135
    Jazzmeister
    Participant

    Re: best toolboxes?

    used to use the ck techincian bag mentioned before…found that it fell to pieces really quickly……..now i use and LOVE this one

    http://cgi.ebay.co.uk/FACOM-BS-T20PB-PR … 518d8447e2


    ….bit exprensive but damn it is built.Had mine about a year now and is still good as new!!

    Jazz

    in reply to: CAPEL WMI2001 – CO3 ERROR #299670
    Jazzmeister
    Participant

    Re: CAPEL WMI2001 – CO3 ERROR

    hehe!

    Jazz!

    in reply to: CAPEL WMI2001 – CO3 ERROR #299668
    Jazzmeister
    Participant

    Re: CAPEL WMI2001 – CO3 ERROR

    F03 = Detects imbalance in 18 attempts (15 mins) of low imbalance level.
    Hope that helps!


    Jazz

    in reply to: zan d/washer mod dx6453 not heating #299390
    Jazzmeister
    Participant

    Re: zan d/washer mod dx6453 not heating

    This is a usual fault with these…check the back of the timer/module behind the facia panel….you will more than likely find the solder blown in the pcb where the relay goes….either repair or replace if that doesn’t work!

    Jazz!

    in reply to: Belling 864ST – push down lid restricting gas flow #297753
    Jazzmeister
    Participant

    Re: Belling 864ST – push down lid restricting gas flow

    sounds like your lid spring/hinges are worn and need replacing! also make sure the caps that are oven the hinge brakets are not broken!

    Jazz

    in reply to: Hotpoint oven BD32B, Blown Element, #297051
    Jazzmeister
    Participant

    Re: Hotpoint oven BD32B, Blown Element,

    Turn off the power and meter the safety thermostat , main oven thermostat and the main oven selector switch….fault will likely bee in there!

    Jazz!

    in reply to: LG Module? #296985
    Jazzmeister
    Participant

    Re: LG Module?

    Have worked on these in the past….the modules aint too great…lets put it like that!! 😕

    Should solve your problem!!

    Jazz!

    in reply to: Insure your washing machine for £1 per week? #293058
    Jazzmeister
    Participant

    Re: Insure your washing machine for £1 per week?

    went to a customer on thursday that pays £5/month for cover on her samsung washing machine………thats currys for ya!!!

    Jazz!

    in reply to: What exactly is ‘domestic’ gas operative #295366
    Jazzmeister
    Participant

    Re: What exactly is ‘domestic’ gas operative

    So it is set up for Commercial use…therefore you would need a commercial gas operative!(even though it is in a residential setting the meter would be to big for a domestic engineer to be legally allowed to work on!)

    Jazz

    in reply to: Teknik (Bosch) SMS6012GB/14 #296163
    Jazzmeister
    Participant

    Re: Teknik (Bosch) SMS6012GB/14

    Check the pipe from the sump to the fill section …it is probably gunged up with old fat and foodstuffs…pull it out from either end and clean it out….then test appliance again!

    Jazz!

Viewing 15 posts - 136 through 150 (of 178 total)