Jazzmeister

Forum Replies Created

Viewing 15 posts - 121 through 135 (of 178 total)
  • Author
    Posts
  • in reply to: fanover run pcb blown 2 times Help help #312271
    Jazzmeister
    Participant

    Re: fanover run pcb blown 2 times Help help

    When i worked for new world many eons ago…. (indesit/merloni group in disguise)
    We ALWAYS replaced the fan AND the board as a matter of course…Hope this helps!


    Jazz

    in reply to: White Knight tumble dryers #311798
    Jazzmeister
    Participant

    Re: White Knight tumble dryers

    replaced the shaft on one of thses before…..complete waste of time….failed in a sgort time and took ages to repair in the 1st place….just stick with a drumm assy!

    Jazz!

    in reply to: WHAT IS WRONG WITH MY HOMARK OVEN? #311423
    Jazzmeister
    Participant

    Re: WHAT IS WRONG WITH MY HOMARK OVEN?

    Did you by chance cook a roast in it prior to this fault…the fault you are describing MAY just be fat on your elements! The only way to get this off is burn it off (open all doors and windows to outside and close all to inside as it can get rather smokey and smelly)

    If you try this please dont leave the appliance unattended AT ANY TIME!
    If you are not sure i suggest you call a technician!

    Jazz!

    in reply to: Duel Fuel Range Cooker Advice #310137
    Jazzmeister
    Participant

    Re: Duel Fuel Range Cooker Advice

    ditto the above comment bought the classic 110 myself they are a quality piece of kit for the price in my opinion!!

    Jazz!

    in reply to: PARKINSON COWAN GAS COOKER RG60DLBKN #311403
    Jazzmeister
    Participant

    Re: PARKINSON COWAN GAS COOKER RG60DLBKN

    Probably just a faulty ignition unit matey…..The re-ignition part inside is not registering the heat! if that were to fail ht lead or igniter!

    Jazz

    in reply to: fagor innova FU6146IT #311188
    Jazzmeister
    Participant

    Re: fagor innova FU6146IT

    F02= no draining
    F08= selector in default…

    Probably a blocked pump…failing that board problem matey!

    Jazz!

    in reply to: Beko Washing machines Both WMA1512 #310194
    Jazzmeister
    Participant

    Re: Beko Washing machines Both WMA1512

    You are most welcome! 😆

    Jazz

    in reply to: Beko Washing machines Both WMA1512 #310192
    Jazzmeister
    Participant

    Re: Beko Washing machines Both WMA1512

    any possible module fault on these and i tend to fit a timer and module….seems to cure 98{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of faults…
    As for the clicking though to 5 these do this a a common action…all i ask is how do you know it only does a 40 degree programme…it is probably doing a 90 degree but you wont know that unless you temp test the water!
    Hope this helps a bit

    Jazz

    in reply to: ariston oven #309585
    Jazzmeister
    Participant

    Re: ariston oven

    You may find , if this is a conventional oven that your lower element is o/c.. You would really need an engineer to confirm this I think!

    Jazz

    in reply to: DeDietrich induction hob #308750
    Jazzmeister
    Participant

    Re: DeDietrich induction hob

    These hobs are powered by 2 main power boards , 1 for the left hand 2 hobs (front and back) , 1 for the right hand ( front and back) hobs.
    You CANNOT have the 2 left hand OR 2 right hand boards BOTH on max power.
    If you select say 15 on the rear right hand board then try to select 15 on the front right hand board the power board will compensate and set one to 8 and the other to 7.
    Advise the customer if she requires 2 boards on full she needs to use 1 hob on the right side and 1 hob on the left side! Otherwise the power boards regulate the power!

    Hope this helps

    Jazz!

    in reply to: Leisure rangemaster 110 dual fuel #306762
    Jazzmeister
    Participant

    Re: Leisure rangemaster 110 dual fuel

    i think the vented “shelf” is a lid liners goes right in the top of the oven…also sounds like you need to check your gas pressure at the meter and at the appliance!!

    Jazz!

    in reply to: Servis 1100 ecocare – blocked soap box #306168
    Jazzmeister
    Participant

    Re: Servis 1100 ecocare – blocked soap box

    this used to happen quite a lot….
    1) unplug the machine
    2) remove spring clamp around the front of the door gasket
    3) remove OUTER edge of door gasket from the cabinet ( not the whole seal!!)
    4) reach inside the machine and feel for a hose on the left hand side at the 9-10 o`clock position
    5) squeeze and manipulate this hose until blockage breaks down!( dont try screwdrivers or pliers to clamp or unblock the pipe as it will rupture!)( if you cannot squeeze as it is too solid a new soap dispenser hose will be required!)
    6) replace front of seal to cabinet by lipping it over the shell
    7) replace door seal spring
    8) test with water loads!

    Jazz!

    in reply to: meggers #303424
    Jazzmeister
    Participant

    Re: meggers

    Recieved thank you!

    Jazz!

    in reply to: meggers #303423
    Jazzmeister
    Participant

    Re: meggers

    could i have one of your pdf,s please martin
    Cheers Jazz

    in reply to: problems- New World oven #305332
    Jazzmeister
    Participant

    Re: problems- New World oven

    Have worked on thses YEARS ago…..dont always suspect the clock as the fan control board was a common thing on these…you should have a service manual that came with the appliance…but dont try it yourself……the repairing engineer will need it…..when i worked on these i was working for indest/ariston/newworld…….try them 1st for a repair agent….They are now Hotpoint/creda/indesit as far as i know….new world was taken back by stoves!!

Viewing 15 posts - 121 through 135 (of 178 total)