johnmac11

Forum Replies Created

Viewing 15 posts - 526 through 540 (of 1,760 total)
  • Author
    Posts
  • johnmac11
    Participant

    Re: Fisher Paykel DD603H – handel panel replacement advice??

    Assuming you have a silver dishwasher the part number for the handle is 528525 which you can buy direct from F&P and it will probaly cost less than £20 to buy.

    If you look on both sides of the tub just behind the drawer front you will see a plastic screw, grab each with a pair of pliers and pull, once off pull the metal drawer front down and away from the tub. Go to the right hand side of the handle and push handle to the left and it will come off, the rest is obvious.

    Kill the power before taking the cover off :zap:

    John

    in reply to: Which company makes FRIDGEMASTER Fridge freezers? #353068
    johnmac11
    Participant

    Re: Which company makes FRIDGEMASTER Fridge freezers?

    Try here,

    http://www.myspareparts.co.uk/fridgemaster

    John

    in reply to: w/m model no please if possible #352809
    johnmac11
    Participant

    Re: w/m model no please if possible

    It is a AWM321


    John

    in reply to: Whirlpool 3LEQ8033SW1 #351958
    johnmac11
    Participant

    Re: Whirlpool 3LEQ8033SW1

    It will be one of these you are looking for, both in stock at Masterpart. The picture name is the part number.

    John

    in reply to: Samsung WF8804RP manual required #352737
    johnmac11
    Participant

    Re: Samsung WF8804RP manual required

    Hi Bryan,

    Can I pick your brain for a moment, according to the parts list the motor for this machine is DC31-00002N, CDSL dont list this motor and I have just noticed that at the end of the motor line on the parts list it says SNA which stands for service not available, does this mean that the part is obsolete??

    Appliance is only 18 months old..

    thanks

    John

    in reply to: Samsung WF8804RP manual required #352736
    johnmac11
    Participant

    Re: Samsung WF8804RP manual required

    Thanks Bryan, much appreciated


    John

    in reply to: oven temperature thermostat #352242
    johnmac11
    Participant

    Re: oven temperature thermostat

    I just tried it again and it recognises the enr number but will not show any parts when you click on it, looks like you will need to call their spares dept to get the part number.

    John

    in reply to: oven temperature thermostat #352240
    johnmac11
    Participant

    Re: oven temperature thermostat

    Try HB9TI50GB/01 and it works on the Bosch site, change the 1 for an I

    I have made the same mistake myself a few times…

    HTH

    John

    in reply to: Maytag GC2225GEKB PROBLEMS #352345
    johnmac11
    Participant

    Re: Maytag GC2225GEKB PROBLEMS

    Thanks dad :rotfl:

    John

    in reply to: In search of the fourth cord #284580
    johnmac11
    Participant

    Re: In search of the fourth cord

    Talking about permissions, at the bottom of this page under “Who is online” it says “Users browsing this forum: johnmac11 and 1 guest”

    Who is the guest??

    John

    in reply to: In search of the fourth cord #284579
    johnmac11
    Participant

    Re: In search of the fourth cord

    I can see his IP address as soon as I press the information button.

    John

    in reply to: Whirlpool Aquasteam 9769B #351898
    johnmac11
    Participant

    Re: Whirlpool Aquasteam 9769B

    Hi John,

    F27 should only appear during the test program, PM me your email address and I will send you some info.

    John

    in reply to: Hoover VHC392T condensor manual #351594
    johnmac11
    Participant

    Re: Hoover VHC392T condensor manual

    Thanks Barry 😀

    John

    in reply to: LG WM1437BFD washing machine. #351466
    johnmac11
    Participant

    Re: LG WM1437BFD washing machine.

    Info sent.


    John

    in reply to: Fisher and Paykel DD603i dishdrawer #351488
    johnmac11
    Participant

    Re: Fisher and Paykel DD603i dishdrawer

    If it is a major leak then it will probably be the fill hose but if there is not too much water it will be the drain hose. When the fill hose goes it normaly bursts apart and is normaly caused by a blocked softener unit.
    PM me your email address and I will send you some info.


    John

Viewing 15 posts - 526 through 540 (of 1,760 total)