Forum Replies Created
-
Posts
-
Re: W/P AWG 320 WP-W2 (853732015280)
The model number you have given is for a Merloni W/D with a Whirlpool badge on it and the timer part no you have is correct.
John
Re: IGNIS D/W
some of the ADL347 variants have a rubber bung in the top of the dishwasher. These are known to rot and fall inside causing water to go over the tank and on to the wash pump causing an earth leak.
John
Re: Welcome To The War Room
Hi Gegsy,
First post in this thread has all members listed.
John
edit: just noticed needs updating + 1 Gegsy – 1 NeilRe: PAT TESTING Do you do it?
paulpaddison wrote:“it is law that any appliance repaired must be pat tested”
(SO I WAS TOLD SO I WAS TOLD ON MY COLLEGE COURSE)As far as I am aware there is no requirement for us to PAT test any appliance in domestic premises. If I am wrong 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of members of this site are in deep goo 😆
JohnRe: Whirlpool AWM5145/2 soap drawer leak
two different fixes that I know of for this one.
1) use silicone and seal the water jets at the front of the conditioner drawer.
2) take out the green divider from the front of the drawer ( this is the part that is used in the drawer for liquid detergent ).
I find that the latter works for me, the water still goes through the gap at the top of the drawer but the shape of the drawer has now changed and the water goes straight back into the housing.
JohnRe: Welcome To The War Room
As far as I can see Sean will suffer the consequences, Gegsy will be in here for the next four weeks solid catching up.
Welcome to the nuthouse Greg. :rotl:
JohnRe: Testing 1, 2, 3…
Just noticed that when you log in there is no “this way to the forums” link. Seems the only way in is through the link to “Appliance Help & Advice”
I like the stats page, looks impressive but how come we have 21.38{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of visitors coming on using an unknown operating system?
John
Re: Testing 1, 2, 3…
Found one even before I go onto the new site :rotl:
kwatt wrote:If you find any errors etc. can you please post them here frome to look into?
What about a hyperlink below this:
Appliance Help and Advice
If you need help using UK Whitegoods then please feel free to contact us using our helpdesk and we will respond as quickly as possible.I notice that there is hyperlinks in the “spareparts” and the “repairs” paragraphs but they are not highlighted for the public. Should they not have a BIG click here arrow.
Also the “repairs” paragraph mentions posting questions in the forums; I smell another link coming on as none available.
In the training session section left hand column there are about 25 words that have no spacing between them Most of them seem to be on the left hand margin.
In the how to get trained section the link to David’s email does not work, could it also be possible to have a link on the pm “dquinn” to go straight to his PM.The last sentence on the page mentions “Project X”??
Thats all for tonight as I have a couple of codes to look at :beer: , :beer: + :beer: = :stupid:
John
BTW new site looks cool, do I sense a sudden increase in page views??
