Forum Replies Created
-
Posts
-
Re: Zanussi 7103s Wont start
Cheers seamy i was looking around there thinking there must be something like this think i,ll go back and have another look jj
Re: Hotpoint WT540/1P serial 801210020
Is it the double valve that screws to the underside of the dispenser if so then C00110333 should do the trick cheers JJ
Re: Indesit door boots in general
I lubricate the spring with washing up liquid then i shove a long screwdriver through the door interlock to catch the spring using my hip to tension screwdriver leaves you two hands to slip the spring round the seal a couple of minutes usualy does it. Did a beko one this way today 5 minutes to fit the seal and spring.
Re: Unknown dishwasher
Not sure but might be a 47917, they used to have problems sticking on programe and not heating, there was a mod to cure it. JJ
Re: Hotpoint "DOOR" fault
If it was a Sole motor thats prob’ly the culprit, loose brush conections are common and the motor overload trips on hot washes
Re: Business cards .
I use a local company i’d rather pay a little extra and help him and on the plus side i get an advert on his site etc, overall i make more from him than it costs me so its a win win for me.
Re: Smeg A2 Range cooker
Had a go still not got anywhere i couldnt see how the side comes off, does anybody have a manual which might help cheers JJ
Re: Can anyone solve this, Hpt Dish
The ring nut that the top spray arm pushes into if the seaL IS worn can cause this fault worth having a look at that.
