Forum Replies Created
-
Posts
-
Re: alternative pattern oven element part no
The part n/o you gave when i looked up didnt show an earth tag, but as Martin pointed out there are ways and means to effect a safe repair.
Re: alternative pattern oven element part no
Nearest i can see that might do is 2000 watt element from connect part n/o ELE9323.
Re: Hotpoint rear drums
6KG the thing is martin is not a sealed drum, its a complete drum assy all assembled with front, back, inner drum and spider screwed together with a heater and and susp pins thrown in, for £79 its a good deal, part n/o is 1603410
Re: Whirlpool ARC5532 Door seals
Hi John my mistake again its for a time share complex, they phoned me with details, ive given them a phone to check and it seems it might be ARC 5553/2 and the PNC N/O IS 850155515110 cheersJJ
Re: Hotpoint WDL540P UK C dryer ntc
They have changed to differant part due to that one causing so many problems, have you checked the dryer element had a few of these or the wiring breaking causing these faults also.
Re: Indesit WIDL126uk sticking on 90 degree wash
I would be going for the NTC as the wash one causes various faults due to them breaking down over time as they seem to become porous over time.
Re: Hotpoint 9604 powerkit
Dont think theres much chance been obsolete for a few years now, i could have made a fortune if they were still available
Re: ind idl40
Check spray arms, and also for an air lock in pressure hose which can cause this fault also.
Re: Hotpoint Aqualtis front weight?
I have known a couple engineers that have managed to squeeze the balance weight in from the bottom, only problem is the new balance weight came loose and a new drum was required, thats the main failure on the Aqualtis is the balance weight coming loose, the 1st ones had a shakeproof washer on all the bolts and none of them seem to come loose, so unless you loctite the buggers in you will be back i’m afraid.
