Forum Replies Created
-
Posts
-
Re: More than one type of Hotpoint smart card reader?
You have to hold the reader onto the back of the module to get it to connect, you are a brave man having a go on one of these was the module blown if so you will need a door as well all the Indesit engineers dread going to them, good luck you will need it.
Re: neff 6544
No Jim it is an old built in washing machine, i had a job 3 years ago on this for a door handle kit, i couldnt find it anywhere, i eventualy seen somebody selling the whole machine on ebay, i bid for it and won he wasnt happy when i asked him to remove the door and post it to me as that was all i wanted from it cheers JJ
Re: Hotpoint WT960 strange noise
Getting loads of 7kg machines with the bearings going, also had a few with loose back bearing had to fit back half to cure,
Re: Connect prices
I got a couple of phone calls the other week about how my spend with them has dropped, wanting to know if it is my workload is tailing off, i told them then it was the price structure and i use anybody else now and only use them if i’m stuck, a servis module connect wanted approx £100 both qualtex and masterpart wanted about £32 plus vat how they can justify it is beyond me it can make the differance of getting the job or not. JJ
Re: WMA (hard) spider bolts??
tolstation Jim, came in a couple of days no postage charge as well with orders over £10
Re: WMA (hard) spider bolts??
I’ve given up on the titanium bits the last lot i bought wouldnt look at them, i bought half a dozen 8,mm cobalt drills and a tin of drilling and tapping fluid for about £25, and it is like night and day, JJ
Re: Hotpoint WD64
The part n/o is 1603277, out of stock at masterpart and connect i’m sure i have a couple kicking around i’ll have a look tomorrow JJ
Re: Whirlpool 3LEQ8033SW1
It doesnt look like any of them John it looks like the second one but is a normal red spot stat fitted to that type of bracket i’ll take a picture and upload it later today, i’m just wondering if its been superseded to the second one cheers JJ
Re: Whirlpool 3LEQ8033SW1
The part i’m after is not the stat and cut out on the heat box they tested okay, there is a four terminal stat and another 2 terminal cut out or stat, situated on the exhaust pipe, the 2 terminal stat is open circuit, i have trawled the internet spending hours trying to find this part, i thought i had cracked it, and i ordered the only one on the drawings i have just received it and it is the wrong one i have got which is the 4 terminal bias stat, can anybody help ple…………….ase, cheers JJ
Re: Indesit IS70C (UK) 806060433
C00257654 is the correct part n/o if it has the 3 stats, and C00260053 if it has 2 stats, the part you are trying to order only got fitted after 11/2010 it has a differant plug on it cheers JJ
Re: Hotpoint Aqualtis
I’m sure if these dont sense water in them the pump wont run, they use a linear pressure switch, you have to watch when working on them if you tip them to far back it screws them upJJ
