Forum Replies Created
-
Posts
-
Re: HJA8630
Thanks Chris i gave the the flow meter a tap with the back of my screwdiver and it kicked into life, i think it must be getting silted up as it only gets used once in a blue moon, so i have advised customer to put through a programe at least once a week, once again i thank you for all the help with this one Chris, JJ
Re: Indesit WIXL 163
Tell them to do a boil wash after fitting , this is supposed to relax the seal, usualy works for me cheers JJ
Re: Indesit DI620 module problem
The 100bit tiomers have a small plug on the side of them some are connected with wiring others may just have a resister connected to it, if you have forgotton to take this of the old board and fit it to the new one, you will not get it out of the test mode as this plug identifies which model of appliance it is, i have had a couple of cases when this has happened.
Re: hotpoint wt 740p
F08 always check the element for being down to earth first, i get loads with elements going down, as iadom says usualy the module but i always stick my megger on the element 1st, JJ
Re: WT960p tub rear half
Yes!!!!!!!!! i wasted a a 6kg back half thinking it would fit but it dont work.
Re: Belt fitting tool
I have had one for years and it is lying in my garage gathering dust i just use a big screwdriver, never had a problem fitting belts with my trusty screwdriver.
Re: Water cooled drain pumps?
Yes they are interchangeable, the C00145315 pump sometimes burntout if they got jammed, the watercooled pump was brought in to eliminate this.
Re: hp wd61p squeaking
It will probl’y have a drum support with stainless steel or brass collar, they used to phospherbronze which didnt cause this, i usualy take the drum out and put a little grease on the collar and around the bearing seal, usualy works a treat. J
Re: Card Terminals
Thanks Guys i think i will have to go down this route, been thinking about it fo a while lots of my customers asking me now if i take cards, almost all of them say they would be happy to pay a small surcharge to cover the cost of using it, so think i’ll be aking a few enquiries cheers, jj
Re: Hoover VHD 8162-80
Cheers Martin, its for a couple of old age pensioners i was called to the machine when it was 13 months old the bearings were shot welded drum i advised to call Hoover, considering the amount of washing they did i feel they should have done it for free.
Re: Invoicing
I have been using easy invoicing for about 2 years now, i use a Brother MW260 printer with bluetooth, which reduces A4 down to A6, the oly problem i had was originaly the type was to small so i emailed eay invoicing who sent me a modified programe for £20,everyboy are fairly impressed with it, it aslo helps with book keeping, when i need to send full size invoices i connect to my wirelees printer in the house, this works well for me.
Re: Which Smartphone ?
Got a Motorola Defy Adroid phone waterproof, scratch resistant , dustproof thought if its all that with bashing i give a phone should be okay, so far 8 weeks in and looks as good as new and works a treat, JJ
