[Jonah]

Re: Ariston A1635 W/Machine

I did ask how many times but they didnt know, could be just the one flash, all programmes selected do this except spin when the pump comes on but no motor action.
Thanks for replying Baron.

Dave

[Jonah]

Re: Belling grill element XOU177 ss

Is it a single or a double element ?

The oven is made by Technogas and you get the same elements from MFI possibly cheaper or Connect

cheers

Dave

[Jonah]

Re: ProblemSolved.co.uk

Interesing Martin, not heard of it before but one of the largest Repairers in the South West is registered on it :rolls:

[Jonah]

Re: Glaring design faults

The biggest Golden turd must go to any Chinese made dishwasher…… nuff said !! 😯

[Jonah]

Re: Matsui

We do Penguin with their Chinese dishwashers, flooded base tray instant BER !!!

[Jonah]

Re: Engineer Vacancies S/West EX, TQ, PL, DT

Still have vacancies, had some intrest but no one followed up, call or email on 07815 085034 or david.jones@ias-retail.com

regards

Dave

[Jonah]

Re: Indesit WD12XUK

Thanks for the help lads, dont normally touch the low end stuff but its good client for us, will try your suggestions.

cheers

Dave

[Jonah]

Re: Engineer Vacancies S/West EX, TQ, PL, DT

Thanks Towan,

Will PM you in the AM with the info you require.

regards

Dave

[Jonah]

Re: Hotpoint and Servis

Wot the 2 Italian brothers are actually back on speaking terms !! 😉

[Jonah]

Re: Engineer Vacancies S/West EX, TQ, PL, DT

I know Alex, worth a try though (only do a couple TA postcodes mate !! )

Cheers

Dave

[Jonah]

Re: Customer removed parts? some advice from the wise

Well Col I would advise him that you have found out the PCB cannot be repaired and he will have to pusrchase a new one in excess of £150.00, that should put him off the repair, in future I suggest you have a phone at home that has caller ID on it so you answer only numbers you know after a certain time and the rest goes to ansaphone, then its up to you if you call a customer or not.

I dont like the idea of a customer visiting your home address either, not a good idea mate, try and keep business and home sepearate to some degree if possible beleive me you dont need the hassle 24/7.

Dave

[Jonah]

Re: Customer removed parts? some advice from the wise

Col,

Would advise you walk away from it, you havent lost anything yet ( in fact u got yer £20} but you could open a right can of worms as you cannot be sure what this guy has done to it !!

You can get parts listings from BSH on their website but not to sure about technical info, but I am sure someone on UKW could help on info.

Dave

[Jonah]

Re: Dual fuel appliances & Corgi

If you are not registered for Corgi I would leave well alone, I have Corgi Engineers and non- gas Engineers, even if its a door glass or a fan element I would never send a non-gas Engineer to a Dual Fuel range or cooker.

We have been to many a job where the installation is incorrect or there is leak on the hob part of the appliance and if the Engineer is not competent in gas repairs or procedures you could leave a dangerous situation quite easily.

You would also find that your Liability insurance would not cover any claims either. 😯

Dave

[Jonah]

Re: My Home Connect?

Thanks for the info Ken, I never received an answer from DSIG from the e-mail I sent them but I am glad you found out the truth.

Regards

Dave

[Jonah]

Re: how to remove panel door from semi-integrated dishwasher

if the clips have a hole in each it is for a T plastic tool to insert and then you pull the plastic tool and the clips release the locking pin on the door, you can sometimes insert a screw into the hole instead of the correct tool and that will do the trick.

hope this helps

Dave

[Author]

Posts