kaibart

Forum Replies Created

Viewing 15 posts - 1,096 through 1,110 (of 1,334 total)
  • Author
    Posts
  • in reply to: Qualtex v Connect #446535
    kaibart
    Moderator

    Re: Qualtex v Connect

    I have a different price to you Dave £30.99 retail £46.49 the more you buy with connect the better discount you get they just want you to waste your time phoning the rep to get a better price

    in reply to: Whirlpool to do a recall on Hotpoint dryers #431634
    kaibart
    Moderator

    Re: Whirlpool to do a recall on Hotpoint dryers

    It looks like a old nextra dryer to me so must be 8-10 years old as there is a place for a mechanical timer :eeek:

    in reply to: Samsung dishwasher #446401
    kaibart
    Moderator

    Re: Samsung dishwasher

    Oe error code sorry

    in reply to: Cooker Isolation Switch over the hob #446277
    kaibart
    Moderator

    Re: Cooker Isolation Switch over the hob

    This is a link to what gas saf say the distance should be.http://www.hse.gov.uk/gas/landlords/1-a … iances.pdf

    in reply to: Cooker Isolation Switch over the hob #446274
    kaibart
    Moderator

    Re: Cooker Isolation Switch over the hob

    Bs7671 gas safety regs

    in reply to: Hoover DYN7164D Filling at end of cycle #446308
    kaibart
    Moderator

    Re: Hoover DYN7164D Filling at end of cycle

    Yea still sounds like a valve, the valve and pump used to be on the same connector on the old Nextra and either of those can cause the problem, but I’m pretty sure it will be the valve kai

    in reply to: Cooker Isolation Switch over the hob #446272
    kaibart
    Moderator

    Re: Cooker Isolation Switch over the hob

    Under the gas safety regs this hob should not been fit like this the heat from the hob can cause issues with the electrical socket whoever fitted this has broken the regs and has no regards to following them, utter stupidity

    in reply to: Hoover DYN7164D Filling at end of cycle #446306
    kaibart
    Moderator

    Re: Hoover DYN7164D Filling at end of cycle

    Only can be a water valve failure kai

    in reply to: Hoover 8142-80 Filling and draining at Same time #446121
    kaibart
    Moderator

    Re: Hoover 8142-80 Filling and draining at Same time

    Take the board off normally situatied in the top left corner and look for a burn make on 1 of the triacs to comfirm board failure you will only be able to see in blown components if the board is removed kai

    in reply to: Beko WM612w #446179
    kaibart
    Moderator

    Re: Beko WM612w

    I would still check both as overloading can cause 1 of them to overheat as you probably know and I would guess either motor or pcb,is the door locking on machine?

    in reply to: Beko WM612w #446177
    kaibart
    Moderator

    Re: Beko WM612w

    I would check brushes

    in reply to: Stoves 050567005 #445864
    kaibart
    Moderator

    Re: Stoves 050567005

    I’ve ordered them now got money off for a 10 minute phone call needed ffa for main oven and some control knobs cheers anyway Dave

    in reply to: Stoves 050567005 #445862
    kaibart
    Moderator

    Re: Stoves 050567005

    If Beko make it you can use Beko parts as connect are nearly double on stoves parts and they supply you with Beko parts with a stoves number on it that’s why I asked dave

    in reply to: Polish Bosch ??? #445858
    kaibart
    Moderator

    Re: Polish Bosch ???

    Hold spin button down and 2 clicks to the left is worth trying to see if it will reset for you

    in reply to: Hoover VHC381 keeps stopping and starting #445706
    kaibart
    Moderator

    Re: Hoover VHC381 keeps stopping and starting

    Check the pump the pipe that connects to it can block with fluff as it has a small plastic nozzle thing inside grey hose, other than that it’s a airflow issue

Viewing 15 posts - 1,096 through 1,110 (of 1,334 total)