Forum Replies Created
-
Posts
-
Re: Hotpoint IWDE126(UK) Door lock issues.
I would look at changing the motor as you know if there are worn brushes the interlock will give problems and the fact it is 1.5mohms is below hotpoints min of 3 mohms
Re: Hoover DYN9144DG gone bang !
Maybe door lock more likely she has overloaded the machine and knackered the motor or dc rectifier also check the main module as Hoover machines always have more than 1 fault eg motor taken pcb out
Re: Fitting paddles to Hoover drum
Can just slot them in like hotpoint but I would do what grooster said
Re: Hoover – VT 816D22/1-80 intermittent power
Put it into test mode if it goes through a test cycle the main pub module at the bottom of machine will be faulty if it doesn’t it will be the top board to put into test press and hold cold wash button and turn the dial to 60 cotton wait until all display and leads are lit release the cold wash button press all function buttons then start the leads for the buttons should go out when you have pressed start this will start the test cycle( make sure nothing in drum thou) hope this helps kai
Re: Hoover Vision DYN9144
Like Martin has said check the dc rectifier also worth checking the module for any burnt parts you will have to take plastic cover off module thou well worth checking as Hoover dc machines are prone to more than 1 part going. Kai
Re: Lam3207 door handle
If it’s a hoover there will be a 31 number somewhere on the data plate and you can search that way
Re: Lam3207 door handle
If it’s Lamona its a Beko if you get the 7 number and search that way or put a pne on connect you will find the part kai
Re: hotpoint WDL5490
Only thing I can think of on hotpoints when they do weird stuff is either the wash or dry ntc does the wash cycle work ok?
Re: bosch wae24060
Have you checked the ntc also all new Bosch washers are now fitted with 10amp fuses odd but they are
Re: Hoover Washing Machine HWB814D Door pops open
Probably due to overloading as it does not do it on every wash but I would change the door lock they do fail
