Forum Replies Created
-
Posts
-
Is the top right door slightly adjar as in the repair manual it’s a cavity out job from what I remember
Ive changed the switch and checked the contacts, I’ve bypassed the stat on the back of oven that neutral feed comes from and I have voltage live and neutral to switch on thing that gets energised is cooling fan and I’ve bypassed thermostat, it’s a basic oven timer stat and selector switch but it’s switched on the neutral side only thing I can’t check is the clock
That complete unit the condenser and evaporator and compressor is lifted out to clean it out properly and after 20 minutes it should draw a minimum of 350w try running it and a timed warm programme if it doesn’t get up to at least 350w after 20 minutes mo repair is possible
Listening to that video I would say it’s the drum or pulley making the noise if a drum is order by the bisch engineer he should also change the pulley and the nut this will sort that problem expect a 2nd visit
The main oven that your saying nothing works the possibility is it could be a toc the second oven probably has earth leakage on a element when its warm as I’m guessing it doesn’t get used often
E36-10 is as dave has said a pump fault so check filter if that is OK it will be the power inverter module
