Forum Replies Created
-
Posts
-
Hi Jon,
If it cuts out then restarts it sounds as if the compressor may be overheating and if that’s the case then there’s little to do about it other than replace that and, that’s not cheap.
A sensor would normally give you either no cooling at all or overfreezing. The boards in them don’t really fail.
K.
All you need should be here:
https://www.ukwhitegoods.co.uk/help/fix-it-yourself/ovens-hobs-a-cookers/2832-grill-element
K.
It’s possible but probably the element, you could check the element with a meter, that’s the easiest way to be sure.
K.
In theory it should be this one in it:
https://shop.ukwhitegoods.co.uk/a03408-oven-function-selector-switch
But check physically as some do use this one:
https://shop.ukwhitegoods.co.uk/a03409-oven-function-selector-switch
Wiring diagrams there’s virtually no hope of getting.
K.
I’m guessing that’s the wrong things you’ve undone as the glass has to lift up, the plates are not fixed to it.
K.
The selector switch that you can miraculously still get, albeit changed, is this one:
https://shop.ukwhitegoods.co.uk/811730195-smeg-oven-selector-switch
K.
Oh I can get them cheaper but, and this will likely apply there as well, you’d be waiting at least 1.5 months for delivery on that part, not available to ship for at least 27 days.
But, not that cheap.
K.
Prices not great, button set is mental but they are:
https://shop.ukwhitegoods.co.uk/1330157449-cooker-hood-switch-assembly
https://shop.ukwhitegoods.co.uk/1330078943-cooker-hood-switch-assembly-buttons
K.
