[laurenceuk]

Re: Belling Cooker 635MH Halogen Element

Thanks Colin, much appreciated.

A little wiring reconfiguration will likely do it.

Laurence

[laurenceuk]

Re: Need Lamp Reflector Diplomat Fridge APP6302 See Photo

Thanks Bob, much appreciated.

Laurence

[laurenceuk]

Re: Hotpoint Auto WMF560 Stays On Same Program.

Thanks Jag, iadom. Much appreciated.

Laurence

[laurenceuk]

Re: Zanussi ZWG1140M Motor Always at Max Speed

Thanks Martin, much appreciated.

I assume this triac is on the board, is it identifiable and can they be replaced?

Laurence

[laurenceuk]

Re: Miele Auto W1714 F53 Code – Expand On Description?

Thanks Seamy, much appreciated.

Laurence

[laurenceuk]

Re: Zanussi Oven ZDQ495B – Need Grill Element…

Thank you all for such a great response. They don’t always make it clear it’s obselete under a specific part number, not hard to put alternate number in.

Thanks again and have a great and best ever new year yet…

Laurence

[laurenceuk]

Re: Bosch WAE28363 Program Goes to ‘0’ When Start Pressed

Thank you Mark.

Just rang customer (couldn’t get there until next Monday) and relayed your advice. She rang back to say it worked.

Thank you so much…

And thank you too, Martin for responding so quickly.

A very happy Christ-mas to you all.

Laurence

[laurenceuk]

Re: H/point FDL570 D/W Is This Sequence Indicating A Fault C

Thanks Iadom, found them.

Could you clarify please. Where you have stated the following:

“Hotpoint FDL570. FDM550 D/W.
Ignore flashing On/Off. Salt & Rinse aid will also flash in error mode.
Wash = 1
Drying = 2
End = 3
Start/Pause = 4″

Am I correct to assume that though the rinse aid and salt lights flash, I am to ignore them as not relating to being part of any error code?

Thanks.

Laurence

[laurenceuk]

Re: Need Part – Lamona Oven Hood HJA2480 – See Photo…

Great work Don, thanks.

Laurence

[laurenceuk]

Re: Need Part – Lamona Oven Hood HJA2480 – See Photo…

Hi,

FYI…

I have just discovered that Glen Dimplex are the preffered supplier of Lamona spares.

0844 815 3745

And the part is in stock!

Laurence

[laurenceuk]

Re: Need Part – Lamona Oven Hood HJA2480 – See Photo…

Thanks Don,

I appreciate your efforts.

I have done this and ordered one from Hong Kong on eBay yesterday – might not arrive though until late December. But I was hoping that Lamona spares would be available in a reasonably organised way in the UK so I can get the customer operational quickly. I only repaired their washing machine a couple of weeks ago and both just over a year old.

Thanks v much again.

Laurence

[laurenceuk]

Re: Beko Wash Mach. WM7335 Anyone Had This Fault Before?..

thanks Jon

[laurenceuk]

Re: Beko Wash Mach. WM7335 Anyone Had This Fault Before?..

Thanks Bazza

[laurenceuk]

Re: My Sharpe M/wave Went Puff! Need Mag – See Photo…

Thanks Jag, that’s great.

I wonder if it is AWI under a different name.

Laurence

[laurenceuk]

Re: Miele T/D T7644C Indicates ‘Full’ Tank Even When Empty..

Thanks Martin,

Will keep that in mind when I go.

Laurence

[Author]

Posts