[Lawrence]

Re: MFI Turmoil

I guess Mark Ridlers phone will be busy ,Interestingly my local engineer has been unavailable all week .
Lawrence

[Lawrence]

Re: MFI Turmoil

We had ours this morning as well got lots of MFI calls boooked for Mon guess there wil be some dissapointed customers .
Mind you we re still trying to work out exactly what the letter means with regard to extracare
Lawrence

[Lawrence]

Re: MFI Store Closures – Which Ones Will Go?

Hi Ex
Are you currently an MFI eng ?if not who is the us you refer to ?
Lawrence

[Lawrence]

Re: servis m6725w three flashes

If you fit a Jenas to a m/c the top board programmes it ,if the top card has blown as well then as everyone says the hand held terminal is req ,but a thought ? all the new Jenas modules come unprogrammed ,your module from EMW may have been repaired but may be programmed for a different model so you will have a conflict between the two .
Lawrence

[Lawrence]

Re: UKW Meeting February 2009

Just so we aren’t falling over ourselves I have invited the following to the next meeting
D&G, Maytag, Whirlpool, Hoover/Candy, Liebherr, Masterpart, SEME, Qualtex, EMW, SMEG (but not hopeful that they will come) MFI, ISDAL, Samsung, LG, GDHA, Servis -quote]

Blimey 😯 That many manufacturers in one room could be interesting ,Do we need to start to talk about the meeting to get it in to peoples diaries etc i’m thinking in the trade forums .

Lawrence
I just noticed masterpart,Seme and qualtex but no connect ,a lot of people were asking whether we could get connect to a mtg,just a thought .

[Lawrence]

Re: Smeg SUK62MFX5

put the knob on ifi ts “out”slacken of the alan key screw in the centre & turn the knob outer round until it points to 12 oclock then retighten screw .
Lawrence

[Lawrence]

Re: UKW Meeting 20th February 2009

r600a wrote:Hi All

And how about MEET the wives..Hopefully the venue will give the wives something to do whilst the men are talking shop.

Bryan
something like after desperate housewives
meet washing machine widows
Lawrence

[Lawrence]

Re: UKW Meeting 20th February 2009

spares suppliers sounds good ,manufacturers sounds good as well .
Maybe they will be more of an incentive for people to come ?
Lawrence

[Lawrence]

Re: Smeg SUK62MFX5

If its the main oven stat and not an energy regulator there is only two wires on it .
Lawrence

[Lawrence]

Re: Maytag MDE8426agw

Parts JLA 01422822282
try the white thermal fuse on the side of the fan duct they short to earth
Front of via screws on hinges and opposite side of door opening .
Lawrence

[Lawrence]

Re: What do you wear for work ?

roly16 wrote:Shorts, of course.

😆 😆 we missed you at Sibson Geoff
Lawrence

[Lawrence]

Re: November 2008 meeting

We are there
Lawrence & Debs

[Lawrence]

Re: COP Draft

If you are reading this then it’s applicable to you as you have access …
The decision was made to hold a specific WTA mtg on the late afternoon /evening and saturday morning of the 7th & 8th of Nov here – http://www.hilton.co.uk/coventry
the purpose of which is to bring together the COP and to talk a little bit of strategy .
Those of us that were still standing agreed to look at the reply that ADE recieved WELL beforehand and to bring the relevant points to this meeting .
Tina & Debbie agreed to come and give admin support .
we don’t expect everybody to come as some are under immense pressure at the moment but there should be enough of us to do what we need to do if you have points and cannot come please pass to me to take .
Thanks
Lawrence

[Lawrence]

Re: What would you do?

Like I said a judgement call..
Lawrence

[Lawrence]

Re: What would you do?

Its a judgement call ,We will screen calls through the office advising of poss things cust can do themselves.
In my experience we get more work further down the line as people remember the little things and will come back to you out of obligation
Lawrence

[Author]

Posts