[Lawrence]

Re: Bosch Exxcel 1400 Spin problem

Hi Tammy
Nice to see you supporting customers, does your support extend to trade engineers as well for technical matters ?

[Lawrence]

Re: Neff D/W (E19 error) S51M66X0GB/B1 (Fd 9507)

its the solenoid on the fill tank , we have one to do tomorrow pt no 00631199

[Lawrence]

Re: What’s the meaning of clockwise or anti-clockwise motors

on Elicas the wires are soldered on to the motors so you wouldn’t have reversed them when cleaning.
failing that contact spares 2 go and ask them the difference as they are the suppliers of the part

[Lawrence]

Re: Samsung American

defrost heater – DA8101691A
thermal fuse – DA4700095E
Drip tray heater – DA4700039B
sensor – DA3200006W

and the fuse is behind the evaporator back right corner

[Lawrence]

Re: WTA Marketplace

We have at least 20 members registered and it’s still rising ,please feel free to start posting items

[Lawrence]

Re: Beko/DAG

does anyone remember getting an email last year amending the Ts &Cs saying that you have to hold SO parts for 6 mths if the appliance is written off before they arrive and then cant be cancelled ?

[Lawrence]

Re: Van Racking

I have just racked a Trafic out using pre cut wooden from ebay , there is loads on there at good prices

[Lawrence]

Re: WTA Marketplace

Thanks Mark for the feedback ,leave it with us

[Lawrence]

Re: Beko/DAG

well we have gone from an average of 50 jobs a week down to 8 , so something is up, factor in the aggro with Orbit and authority issued for a repair with special order parts totaling £284 and then 3 days later they decide to write it off and expect us to hold the special order parts for 6 months at our cost and then if not used they will pay for them apart from any claims over 6 months automatically get rejected.
Not a happy D&G agent

[Lawrence]

Re: Falcon SXS918 Degrees Farenheit to Celcius please?

Just had a thought of it’s USA built it would automatically be Fahrenheit and you may not be able to adjust
If you get the full
Serial number I can find out

[Lawrence]

Re: Falcon SXS918 Degrees Farenheit to Celcius please?

Look for the handbook on parts arena

[Lawrence]

Re: Beko/DAG

somethings going on, its like a tap has been turned off here ..

[Lawrence]

Re: New work for WTA members.

Ian do you have an email for them

[Lawrence]

Re: Happy retirement Jim Banks.

Along with others on these forums Jim has always been a true gent and I would like to wish him well and a happy retirement

[Lawrence]

Re: Samsung WW10H9600EW/EU control module

Part no will be on the module somewhere

[Author]

Posts