Forum Replies Created
-
Posts
-
Re: Zanussi FJS1197W 914788514/01 no fill & no motor act
Also had it where if re-gen pumps go’s can take out pcb, so worth checking before you start job. 😀
Re: beko free standing
twist the fuse together to see if it will work then if so then go ahead and replace if not get your meter out !
Re: hotpoint wf
Check the motor luggs – the little black lugg spacer sometimes is missing and only makes a noise at high spin speed. Worth a look just in case. 😀
Re: Beko WMA 610S rinse light on
After checking carbons I would be checking the pcb – changed loads.
Re: bad smelling hotpoint
Generally changing to the opposite of what you have been using eg powder to liquid, liquid to powder.
My machine started to smell after using liquid for years changed to good quality powder as mentioned and within 6 washes smell disappeared never to return.
Wife happy which in turns made me happy less ear battering. 😀
Re: HOMESERVE APPLIANCES
Click on home jobs and pick a product to be repaired and it is a flat rate.
Tumble dryers £105 etc.Re: HOMESERVE APPLIANCES
Try booking a call and see there standard charge/call out, LMAO how will they get away with it. ❓ Will it be the same charge for a bearing job or blocked pump ❓ ❓
Re: Diplomat 8512
They do have a habit of not spinning without clothes in but also as said before belt must be tightened and then try with 3-4 towels and should spin. 😀
Re: comp horsepower
Hi bobhope any chance of a copy of the chart as I am always getting asked and that would make my life alot easier. 😀
Re: Zan WD not drying
To check before replacing valve take the lid off and check condensor and look along the back plastic pipe for water flow. Go call helo_75 😀
Re: British Gas Engineers
Lucky you we get 2 slots unless its a Hoover tub maybe I need to change service centres LOL
