Forum Replies Created
-
Posts
-
Re: NEFF U1130W1GB/01 Main oven stat
Looking at the diagram one of the switches is more expensive than the other, which I would guess would be the main oven one due to having more functions therefore being bigger so I would go for part number. 082388 this being the left hand stat on the diagram.
HTH 😀
Re: Hotpoint Fridge Freezer FF200E
turn to fully on then off and back on again which will reset. Then set to i-care.
Re: Hotpoint AQXXF149pi
C00094715 heater wash 1700/230
C00119129 heating element+term.cut-out
C00083915 thermistor ntc (hl)Hope this helps. 😀
With commerical code 41786
Re: Bosch Dishwasher Guidance
You will find the info required in the box with the new board.
Ask your supplier, if they are nice to open up one and photocopy otherwise you may have problems programming old one.
Re: possiable re-gas needed
If the compressor is weak it will not pump the gas around properly but you will be able to hear what sounds like water running down the back so go have a listen.
If so your compressor has gone and will need replacing. Hope this helps.
Re: RNLI
Never had to call on them, but they do a fantastic job and it is nice to know if required they are there regardless of there own safety.
Sent the email with a link to everyone in my address book. 😀
Re: KGN33V00GB/01
WILL NEED THE MOD DOING ALSO A FRIEND WORKS AT BOSCH AND THEY HAVE JUST BOUGHT OUT ANOTHER MOD, AS THE LAST MOD STILL FAILS.
THE PREVIOUS MOD WAS HEATER AT REAR, METAL PLATE IN FREEZER AND NEW PCB WHICH TO BE FAIR NORMALLY WORKS.
Re: Siemens WM50201GB/01 spider.
Bosch part number: 208365 listed to public at £135.88
Hope this helps 😀
Click link to look for yourself, this link is very helpful.
https://www.bosch-eshop.com/eshop(bD1lbiZjPTAwOQ==)/bosch/gb/indexs.htm
Re: Candy CDI 1012-80
151a 41008097 Electronic module End 0602
151a 41016113 Electronic module Start 0602This is for product code 32900060 CDI1012 80
Hope this helps. 😀Re: Whats the most annoying thing customers do?
We had a young lady come to work for us and at the interview she was told that “all engineer’s do bearing / tub changes” her reply was yes no problem.
First time she had a tub change on a Hotpoint did nothing but bitch about it and when she was given a Bosch tub change with the weight in the rear half god did everyone know about it.
In the end she left before she was sacked so I agree when the job requires heavy lifting generally most women are unable to lift the weights involved.
