lerch

Forum Replies Created

Viewing 15 posts - 271 through 285 (of 353 total)
  • Author
    Posts
  • in reply to: LG wm 1460 FHD & wm 1280 FHD Bearings #245531
    lerch
    Participant

    Re: LG wm 1460 FHD & wm 1280 FHD Bearings

    H if you are changing the tub and not just the bearings becareful as new tub has holes for direct drive indifferent position. 🙁

    in reply to: Indesit TD Model IS60V (vented dryer) #245536
    lerch
    Participant

    Re: Indesit TD Model IS60V (vented dryer)

    Sounds like you a shaft kit fitted. Part number hotp1703080. 😀

    in reply to: SAMSUNG FRIDGE FREEZER #245336
    lerch
    Participant

    Re: SAMSUNG FRIDGE FREEZER

    A model helps but if you are not getting any water then remove back panel in fridge side and check to see if the evap is frozen up along with the cover its self.

    1. Check that the thermal fuse and sensor are ok.
    2. Check both heaters drain and evap unconnect the heaters as they are linked together or you will get a false reading.
    3. Defrost drain hole
    4. Fit modified evap cover with clip that go’s onto heater direct.
    5. By this time the water container should have defrosted enough to allow water through.

    😀

    in reply to: dishwasher detergent #245299
    lerch
    Participant

    Re: dishwasher detergent

    Hi I found when I used them in my dishwasher (bosch) that they sometimes got stuck in the door, did not always disolve and were not really that good at cleaning.

    Have tried various own brands etc but everytime I go back to finish and then rarely a problem. 🙂

    in reply to: Bosch dishwasher heater #245031
    lerch
    Participant

    Re: Bosch dishwasher heater

    Double check and I think you will find the first 0 is a C ❗ ❗

    in reply to: How Do You Keep Track Of Spares Parts You Keep Instock ? #245062
    lerch
    Participant

    Re: How Do You Keep Track Of Spares Parts You Keep Instock ?

    Try using a spread sheet and update at end of day.

    You can then see how many you use each week/month/year and adjust van stock to suit your needs.

    in reply to: City Centre call? – no way Jose’ #244528
    lerch
    Participant

    Re: City Centre call? – no way Jose’

    I agree with martin. I have done this before rang customer in the morning to confirm that I was coming and give a eta, then rang when on way saying see you in 30 minutes only to get there to find after parking and walking half way across town that the machine had been scrapped by owner day before. Parking time 15 minutes to find space, 10 minute walk there £3.50 parking and what for sweet fa 👿 So now sorry thanks but no thanks.

    in reply to: HooverAM110/01 door latch #187021
    lerch
    Participant

    Re: HooverAM110/01 door latch

    Hi been onto the gias website and spring listed with door catch kit. Part not listed on its own. ❗

    in reply to: Proline slim dishwasher. PDW O8O #244335
    lerch
    Participant

    Re: Proline slim dishwasher. PDW O8O

    Sorry left hand side from the front or right from the back. 😳

    in reply to: Proline slim dishwasher. PDW O8O #244334
    lerch
    Participant

    Re: Proline slim dishwasher. PDW O8O

    There is a screw in toc on right at back but also look to the right and you will also see another stat so check that as well. The timers on these are also very poor. 🙁

    in reply to: Commercial Guarantee #244302
    lerch
    Participant

    Re: Commercial Guarantee

    Some Bosch, Lg and samsungs come with a standard 2 year warranty. 🙂

    in reply to: whirlpool dryer door handle catch and lock needed please #244172
    lerch
    Participant

    Re: whirlpool dryer door handle catch and lock needed please

    4812 2713 8463 Door lock system GW
    4812 4521 4629 Handle,door + hook WH EBL
    4812 2761 8422 Pin Start reset GW

    😀

    in reply to: Who does prewash anyway:? #244210
    lerch
    Participant

    Re: Who does prewash anyway:?

    I cannot remember the last time I went to a customer that uses the pre-wash with the exception of the little old ladies who still do it even after you tell them they have no need to. 🙂

    in reply to: WMA46 BOARD #244001
    lerch
    Participant

    Re: WMA46 BOARD

    From memory is this the one with the white wiring going to motor if so check the wiring by the concrete weight underneath as it has a habit of cutting though there. 🙂

    in reply to: CREDA T/D TVR 2 #243642
    lerch
    Participant

    Re: CREDA T/D TVR 2

    if you look at the door lock on the floor so spring on left and catch on right then from right to left :- red + white — brown(think it is anyway, other two are correct) — grey.

    hope this helps. 😀

Viewing 15 posts - 271 through 285 (of 353 total)