Forum Replies Created
-
Posts
-
Re: Sanyo EM-SL30N Combi Microwave Intermittent Heating
Believe me.. if u get it wrong inside of these… they are powerfull enough to lift u off your feet and throw u another few feet.. instant death also!
NO JOKE! 😉Re: Sanyo EM-SL30N Combi Microwave Intermittent Heating
Very highly likely a switch…possibly door latch out of line too, But i dont think you will get anymore info than that.. to be fair it is VERY dangerous inside those machines… take it to a local repair centre..the cost should be reasonable.
Re: Replacement fridge and freezer
Ya wouldn’t go far wrong with a Miele FF F/F.
Excellent Quality, and worth every penny in my opinion.
I aint a big fan of side by side.Re: Whirlpool oven won’t heat up
Directly underneath all your posts u will see a link “find a engineer” follow the directions and fill in the form.. u should find a suitlable engineer that way. 😉
Re: Whirlpool oven won’t heat up
Yes it looks like it possibly needs a new element.
If you have done everything correctly on your clock it obviously now has a O/C on the element…
What was the reason for the electric to trip in the first place?Re: Hotpoint WML 520 Leaking Occasionally
iadom wrote:If it is leaking at any point during the fill cycles then the fault lies in the drawer or water pressure area.
Turning down the pressure a little more may help. in the past if I had one doing this and there was enough room under the worktop I used to adjust the two front feet to give the machine a very slight backwards tilt.
Sadly your machine has no original Hotpoint in it, its 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} Indesit, these will have a pump filter behind the prise off plastic kickstrip at the bottom front.
Jim.
WOW i also had a hpt like this a couple of year ago… checked everything out all seemed ok… guy had had this machine a few years and he said its never happened before, he luckily stipulated that the water board had been around in the week digging up the road… can only assume whatever they done gave the inlet to hes house a pressure boost… so i also raised the front feet slightly and very slightly turned off hes cold feed supply… hes never wrang back! 🙂
Re: Whirlpool oven won’t heat up
get yor usemanual out , dust it off and set the clock.
Then return with your findings.Re: Water stabilizer for washing machine
Always remember.. if something sounds too good to be true…. 😆
Sand would be better though i guess.
Re: Masterpart site down?
I tried to reply to a post on here about half hour ago.. it gave me a 403 error page on submit… hit the back button and tried three times with same result.
Cleared now though.Re: Hoover AI130 w/m
Also check the valve feed under the sink if its there.. might of been “knocked” when shes been in and out for things.. or inlet pipe kinked?
Re: linking to ukwhitegoods website
Did u get sorted with this?
if its html and text then TYPE WHAT YOU WANT HERE NO SPACES
Re: When is salt NOT salt?
WILLthesparky wrote:i was thinnking more rock salt
A couple of years doing that ( if the machine didnt pack up ) your gonna make your dentist one very rich one. 😆
Re: Mini Candy washer pump
iadom wrote:
LJDomestics wrote:
bloody squash?? since when did you have time? 😆
Only manage three games a week these days, you’ve no idea how theraputic lashing that little ball against the wall is after a day a the ‘coal face’.
It helps me keep fit enough to lift a washer down three or four steps into the back yard or garden of a customers house on a nice day. 😛 😉 😆
Jim.
Funny thats what the missus says about my 2 😆
