Forum Replies Created
-
Posts
-
Re: HOOVER HNC 382T I need A lesson Please
Martin wrote:Changing the belt on this pile of junk is an experience few would dare!
come on guys YES these are a very bad desighn not engineer friendly at all . shoot me down lol belt change in under 20 mins is possable . yES I HAVE DONE IT .. WAITING FOR THE CROSS HAIR ON MY BACK .
Re: Hotpoint FFB6 200AP flashing lights
To reset it turn both control knobs all the way to the left then all the way to off , then back on again should do the trick
At the same time lol for got to add that…..or turn both controls to off press and hold the fast freeze button for 5 secounds leave for 3 mins then switch back on
hth phil
Re: Hoover OPH 714D/1-80 odd faults
heater every time as bob says . well… try reversing the polarity
(not recomended ) it will work for a while , gets you out of trouble when you have to order a heater , and iff its miles away. some thing hoover has not picked up on yet …Re: Hotpoint – Indesit Fridge Freezer Fires
so ive been told its the quadrio , more of a puff of smoke and blowing a fuse lol
Re: cda
the cda dvd does not reconise that model number ,repost and will send you a pdf of the machine ….
phil
Re: Indesit is70c / tripping electrics
try this iadom very easy to do.
take the screw out of the jockey pully the one neatst the side panel unscrew the the other one untill it can be un hooked from the motor , place pully around belt one big heave
and hook the jocky pully back in place the screw acts like a hinge , screws back in and yer done …Re: Whirlpool ADG7560/01 Integrated Dishwasher not washing
the standard reset , press and hold start button till it peeps the shut the door let it finnish 🙂
not hered from the 3 dishwashers since one was at least 6 weeks ago , one was a traders own dishwasher lol
phil
Re: Hoover VHC 381 C/T/Dryer stopping
An abomination of a machine TBH YES . full strip down untill you get to the resavoir in the condeser unit were the pump should be , iff its got one or just a float with a micro switch ? it will be fluffed up to death.clean it out.
water not getting to lower tank , also check for fluff in the neck of the water tank , hth philedit thats why condensation running down the door glass it carnt get out . lol
Re: Whirlpool ADG7560/01 Integrated Dishwasher not washing
ok had a 3 of these do the same thing . get a fly lead and put 240 volts to circ motor see iff it runs , iff it runs , reset dishwasher , dont for get to close door and let it finish to off . start quick wash , all should be ok .
Now??? i dont no why this fixes it , but it does , yes i am confuzzeld to ………..
Re: Exploding Candy Washing Machines
Hotpoint wagon turned up friday to deliver a few bits there was 3 indeshites on the wagon all looked like they had exploded lol
Driver would not let me take photos i wounder why 🙁Re: Hotpoint DWF30N dishwasher not drying
as martin says check module for dry or burnt out joints also would be looking at the harness were the door open and shuts
Re: hoover vision sensordry
Open or Short Circuited NTC Probe for Drying and/or Electronic Module goosed
Re: Hoover AM12001 Washing Machine N.37615986 0102 2690 NO S
heater o/c or low insulation , gunged up pressure systom can cause this problem .. my bet its this > In case the User should choose to carry out a “spin only” phase out of one of the
programs for “white cotton”, the spin will not be activated if the “easy ironing” or
“anti-crease” option was previously selected. Therefore, to perform the spin, the
related option pushbutton must be de-activated. lol some times there in some times there out :rotfl:nice post leavemetogetonwithit great minds think a like
