Forum Replies Created
-
Posts
-
Re: Height reduction kit
Penguin45 wrote:Last one of those I had come in got chopped up and welded into the Wolseley……..
Sorry,
Chris.
There’s a first, a reduced height Wolseley 😆
I have somewhere in my garage a worktop of a old Hotpoint Micro Profile, 1/2″ thick chipboard, looks like I will use it. Cheers all for the help 😉Re: Height reduction kit
Phidom wrote:I think I would just cut the edges off the original lid with tinsnips, drill some holes and screw it down.
Brill idea, only problem the old tops gone walk about 🙁
Re: Britannia cooker? info
spimps wrote:Think this(beneath the grease 😯 ) is a Britannia ckr model
SI5-TB-GRA-BR – ART -JPD90 NMP are what is on the plate.
Anyone help or have any info please?
mixed fuel ckrI think Britania are based in Blackpool mate, try this link
😉 http://www.britannialiving.co.uk/Re: Candy CCS5136W Fridge Freezer
Penguin45 wrote:Sent you some interesting reading……..
Chris.So you have, many thanks again Chris 😉
Re: Debor Glue
leavemetogetonwithit wrote: I used debor for the last twenty years but recently switched to silicone for most purposes thinking it less likely to injure my health.
Mike.Then you should stop sniffing it mate :rotl:
helo_75 wrote:for sure, there will either be something in there, or the locking tab will be broken
The only thing I took out was a bra wire the size of Wembley 😀 It hadn’t been in there long. The paddles started to break off from when the machine was new and under gtee. , customer phoned Indeshyte and they just sent out new lifters but no engineer to fit them, so there is a chance that the customer did not fit them well, although the tabs were in A1 condition.
helo_75 wrote:there is a mod, to help the paddles fit tighter, makes me giggle everytime i read it
Any chanch of you enlightening us O wise one 😉
Re: Hotpoint Indesyhte drum lifters
chezza wrote:They never ever ever ever wash trainers :rolls: 😆
This pair are an elderly couple 😉
Re: Stevie Wonder
cornwell40 wrote:
I jazz chord, to say, i ruv yoo. 😆TC
Should be shot for that one mate :rotl:
Re: Jackson Halogen ring
maltheviking wrote:I am just ordering one of these 6203429 for a job so I will check to what all the fuss is about and see if there is an info sheet included 😉
Ok one arrived, connection diagram included 😀 only problem diag. is for a “Eika” manufactured type, ring supplied is an E.G.O 👿 I presume yours was this type Lawrence?
I tryed to contact Indesit to see if they could supply an updated diagram.
7 phone calls later 👿 I kept being told this is the wrong dept. please ring this no. etc.
Finally I made a poor girl listen to what I was asking for 😥 where upon she had great enjoyment in advising me that Indesit do not give out wiring diagrams 😯 When I pointed out that the element had come with a leaflet albeit the wrong one, she still argued black and white that diagrams were not supplied by Indesit.
I read her the leaflet no out and asked her to speak to her superiors about it and give me a reply by email. I wonder if I will get one?Re: Hotpoint FF92S frost free fridge freezer
Kez wrote:Evaporator motor is ok, had new thermisters, fridge thermister ok but there is no power to fan. Presume module does anyone have any ideas on this please? Cheers Kez
Does the door have to be closed for the fan to operate on this model?
Re: Jackson Halogen ring
I am just ordering one of these 6203429 for a job so I will check to what all the fuss is about and see if there is an info sheet included 😉
Re: Check out your digits
Penguin45 wrote:‘Smy birthday…….. Where do you think the “45” bit came from?
P45,And I just thought you’d been paid off 😆 or was that UB40
