Forum Replies Created
-
Posts
-
Re: Bosch WFR2460 Maxx-it problem – help please?
Craig,
It will almost certainly be board failure (usually the rotary switch unit on the PCB fails).
As this model only came out from 2001 it may be covered by an extended parts warranty 🙂 so do check with BSH Appliance Care Ltd first. 😉
Martin
Re: AEG Lavamat 528 (605 632 206) timer problems
Andy,
Wiring diagrams and schematics for AEG are rarer than hens teeth and not available to the general public anyhow.
Specifically what is your problem, maybe we can help 🙂
MartinRe: PAT Testing
Go for it Toni!
PAT testing can be very lucrative with letting agents as your customer. Mind your charges though, which usually are a whole lot less than regular call-outs, or should be.
Martin
Re: AEG Lavatherm 3300 TD
Toni,
You could be right but first ensure the ‘wiper brush’ unit is making a good contact on the drum. If it doesn’t make good contact the module does not play ball 😉
Also worth replacing all the stats in case one is playing up (cheaper to do that than buy a module and find it wasn’t that 🙁 )
Martin
Re: Kevin’s Boudoir
johnmac11 wrote:C’mon Martin,
…..and Oldtog managed to capture John in a good light 😆
eastlmark wrote:Having a few probs posting comments for the latest photo’s Ken.
I did it for you Mark 😆
kwatt wrote: LMAO
Me too!
Martin
P.S. D C and Kevin came out of this relatively unscathed this time 8)
Re: Siemens Dishwasher SE26230GB/07
Alison,
First thing to try at this stage is to ‘reset’ the programme. 😉 From memory, with the machine turned on, press the 2nd and 4th buttons together and hold for 2 seconds. That should turn on the drain pump for 60 seconds then turn off!
Then try a programme, see if it works 🙂
Martin
kwatt wrote:Or you could refer to…
Now I know that’s there, even better info for future referals, thanks Ken :tup:
Martin
Re: Bosch wfl2260 smell…..
Joe,
It will need a few long hot washes to help cure this I guess. Calgon is worth putting in to help with what is really a build-up of limescale. Also try 3 heaped tablespoons of Bicarbonate of Soda in the drum and set on a 60 degree wash cyle to help clear it.
Finally, remove and scrub clean the dispenser tray and inside the dispenser cavity. My advice also, is to avoid liquid detergent in a hard water area, powder or tabs are best 😉 Plus scrape clean the folds of the door seal too 🙂
Martin
Re: Kevin’s Boudoir
Martin wrote:Have you got to grips with Oldtogs floppies yet Ken 😈 ❓ 😆
😆 If so when are you going to hang them on the site? 😆😆 What happened with the snapshots Oldtog took then? Did the old codger forget to put film in his Box Brownie or what 😆
Martin
Re: Dishes/Cutlery coming out dyed ‘blue’ in D/w
washerdoctor wrote:The suggestion of copper is an interesting one though, perhaps it is a chemical reaction between the tablet and copper, Copper sulphate is blue isn’t it!
That’s given me an idea 💡 Copper Bottomed Saucepans 💡 I wonder if they are washing them in there ❓ . I’ll find out and get back to you on that 🙂
Martin
Re: Merloni
Copied from NESN’s web-site :-
“Our ‘Cradle to Grave’ concept is able to provide total service provision from the point of manufacture through to disposal.
As the market place changes, and consumer ‘demands’ become greater, it will become increasingly more important that one company can deal with all aspects of consumer servicing. We feel that we are ideally placed to work as trading partners in these situations.”
😆 😆 😆
Martin
Re: Dishes/Cutlery coming out dyed ‘blue’ in D/w
Simon46 wrote:Is there a pen dropped in there somewhere whilst loading dishwasher?
Thanks for the suggestion Simon, but I think even my customer who have spotted that if it were. We are not talking ink spots here but major staining all over 🙁
Martin
Re: lonely women
Lawrence,
You started this thing after all and I agree, it does need tidying up a bit. Perhaps we should indeed compile it ALL into one thread, good idea 🙂
“Trade Tales” “Tradesmens Stories” “Joe Public” etc etc…..
Martin
