Martin

Forum Replies Created

Viewing 15 posts - 2,896 through 2,910 (of 25,534 total)
  • Author
    Posts
  • in reply to: Bosch SMS50TO6GB/09 #428333
    Martin
    Participant

    Re: Bosch SMS50TO6GB/09

    ajkwales wrote:i think it was this, is this the right one please? thanks

    Yes that is the part you need.

    in reply to: Bosch SMS50TO6GB/09 #428330
    Martin
    Participant

    Re: Bosch SMS50TO6GB/09

    Then that is your problem.

    in reply to: Bosch SMS50TO6GB/09 #428328
    Martin
    Participant

    Re: Bosch SMS50TO6GB/09

    Double check that the pump cover (in the sump) is correctly latched into position.

    Martin
    Participant

    Re: Hotpoint WMA31P Water fill low and conditioner used too

    A typical case of the owner/user not really knowing what goes on with the machine until it goes wrong. Then watches it closely after the repair and assumes there still is something not quite right? When in fact all is back up and running as normal. 😉

    in reply to: Hotpoint Aquarious VTD6000 Tumble Dryer #428344
    Martin
    Participant

    Re: Hotpoint Aquarious VTD6000 Tumble Dryer

    Oh Forum Rules…piffle! What wires are your referring to?

    in reply to: JLP oven help #428325
    Martin
    Participant

    JLP oven help

    I’m thinking there must be a connection problem (ribbon cable) or fault with the main programme board? You’ve swapped over the sensor and the power board to no effect so my conclusion is based purely on those facts only. HTH?

    in reply to: Bosch SMS50TO6GB/09 #428326
    Martin
    Participant

    Re: Bosch SMS50TO6GB/09

    Does the main circulation pump sound noisier than usual, or has it got more noisy recently?

    in reply to: Bosch WAS24466 #428339
    Martin
    Participant

    Re: Bosch WAS24466

    Two thoughts: 1, Motor insulation? 2, Carbon dust on PCB?

    Martin
    Participant

    Re: SL15J1F (S5444X1GB/23) Neff dishwasher won’t fill, baffl

    wahee wrote:It’s like something is the dishwasher is keeping the aquastop valve shut. Can I ask if there should be AC across the two wire to the aquastop in normal operation.

    Yes indeed.

    Martin
    Participant

    Re: SL15J1F (S5444X1GB/23) Neff dishwasher won’t fill, baffl

    Hole C would likely blow clear if you undid the salt cap first.

    Martin
    Participant

    Re: SL15J1F (S5444X1GB/23) Neff dishwasher won’t fill, baffl

    I’ve never ever come across issues with water softener so this will be a first. Did you regularly use salt by the way?

    Martin
    Participant

    Re: SL15J1F (S5444X1GB/23) Neff dishwasher won’t fill, baffl

    Time then to remove the control unit and visually check for component damage. Power unplugged before going in 😉

    in reply to: Siemens SN65M031GB/14 Int’ Dishwasher #428301
    Martin
    Participant

    Re: Siemens SN65M031GB/14 Int’ Dishwasher

    Door catch problem maybe? The machine may need adjusting (levelling) so that the door closes fully.

    in reply to: Neff error code? #428283
    Martin
    Participant

    Re: Neff error code?

    Red door releases are only on models with solenoid door locks. This one is handle access only.

    in reply to: Neff error code? #428279
    Martin
    Participant

    Re: Neff error code?

    I’m just guessing here Jim but might be basetray flooded?

Viewing 15 posts - 2,896 through 2,910 (of 25,534 total)