Martin

Forum Replies Created

Viewing 15 posts - 3,526 through 3,540 (of 25,534 total)
  • Author
    Posts
  • in reply to: SIEMENS WT46W560GB COND DRYER #421463
    Martin
    Participant

    Re: SIEMENS WT46W560GB COND DRYER

    funkyboogy wrote:no takers on this one ? ..

    martin

    Sorry ally, it’s a heat pump dryer and I run a mile in the other direction when one of these comes up…….. 🙁

    in reply to: Neff D/W tap symbol flashing? #421553
    Martin
    Participant

    Re: Neff D/W tap symbol flashing?

    Check with your local water company to see if they too were affected by a water supply issue as you were. If so, problem solved, sleep easy. 😉

    in reply to: Abestos in oven? #421580
    Martin
    Participant

    Re: Abestos in oven?

    A rough guide : Insulation used before 1993 could contain asbestos or asbestos/cement compound insulation. Insulation used after 1993 on cooking/heating appliances should be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} asbestos free.

    in reply to: Hotpoint serial number question #421547
    Martin
    Participant

    Re: Hotpoint serial number question

    This might help….

    in reply to: Pinpointing this pesky gas leak #421531
    Martin
    Participant

    Re: Pinpointing this pesky gas leak

    Please please please don’t mess with it, do as Andy says and call back in the professionals.

    Gas + leak = dial 0800 111 999

    DO NOT MESS WITH IT AS YOUR LIFE AND OTHERS AROUND YOU ARE NOT HELPED BY AMATEUR DIY MESSING…..!

    Martin
    Participant

    Re: Bosch new format SBV50E10 wierdness – wont work unless y

    The drain pump.

    in reply to: Non Payment – National Lettings Franchise Chain #421469
    Martin
    Participant

    Re: Non Payment – National Lettings Franchise Chain

    Name names in case some other poor guy falls foul.

    in reply to: Bosch SGS56E02GB/47 no heat and wont finish cycle #190815
    Martin
    Participant

    Re: Bosch SGS56E02GB/47 no heat and wont finish cycle

    Mains filter blown

    in reply to: Tecnik 8085 gas double oven #421400
    Martin
    Participant

    Re: Tecnik 8085 gas double oven

    Switch off power for 30 secs, switch back on and reset the clock to the correct time. Hopefully doing that will sort it. If ‘Auto’ still shows in the window then press the hand button once.

    in reply to: Tecnik 8085 gas double oven #421398
    Martin
    Participant

    Re: Tecnik 8085 double gas oven

    car43 wrote:HB9TIA3GB/01. Thank you.

    That is NOT a gas oven but an electric double oven!

    To switch that electric oven to manual you simply depress the button marked with a hand symbol.

    in reply to: Tecnik 8085 gas double oven #421396
    Martin
    Participant

    Re: Tecnik 8085 double gas oven

    Please provide the full model (ENr) number.

    in reply to: ISE W1607W ADO error code #420563
    Martin
    Participant

    Re: ISE W1607W ADO error code

    neilbow wrote:Just an update on this one, We have tried as suggested but still cannot clear ado from display,looks like a bit more than finger trouble

    Oh dear! I’m not sure who fixes ISE machines that can help you further but hopefully a call to ISE HQ might be the way forward. Is it not covered by some sort of warranty?

    in reply to: Football Season 2014/2015 #417474
    Martin
    Participant

    Re: Football Season 2014/2015

    Add to that a few icebergs and the nightmare would be complete………. :mrgreen:

    in reply to: I need to save space saving help required. #421392
    Martin
    Participant

    Re: I need to save space saving help required.

    They don’t come any less than 54cms I think you will find. 🙁

    in reply to: Haier dishwasher dw12pfw2me fault code #420386
    Martin
    Participant

    Re: Haier dishwasher dw12pfw2me fault code

    Lucky indeed……

Viewing 15 posts - 3,526 through 3,540 (of 25,534 total)